You are here: Home > Parts & Tools > Chainsaws > Stihl > Stihl 056 > Bar

Stihl 056 Chainsaw Bar Replacement

The Stihl 056 bar plays an important part of cutting, it guides the chain to keep it moving straight and true in the direction of the cut so the chain can cut the wood properly. The bar is made of high quality super tough chrome-moly steel. The Stihl 056 bar rails are heat treated to provide superior wear and bar body strength. If the chain moves side to side inside the bar, the bar rails can become chipped, the bar can be bent, at which point the Stihl 056 bar will need to be replaced. We offer suitable replacement chainsaw bar parts for this exact model chainsaw below.

Sort By:
Page of 1
STIHL BAR NUT, REPLACES STIHL PART # 0000-955-0801 STIHL BAR NUT, REPLACES STIHL PART # 0000-955-0801

STIHL BAR NUT, REPLACES STIHL PART # 0000-955-0801, 8MMID X 19MM  BAR NUT

Our Price: $2.50
   
 

Suitable Replacement Stihl 056 Chainsaw Bar Parts

If the sprocket nose is broken or locked up, the bar needs to be replaced. The sole purpose of the bar is to guide the chain in the wood for a clean and straight cut.

Stihl 056 Replacement Bar

Performance Parts Supply suitable replacement chainsaw bars meet or exceed OEM specifications for Stihl 056 replacement bars and they cost less than OEM bars while maintaining excellent quality and durability. Chainsaw bars should either be replaced or cleaned per manufacturers specifications that are located in your owners manual. You can quickly buy our suitable replacement Stihl 056 Chainsaw Bar parts for sale in our online store and get it shipped fast.

Stihl 056 Bar Lubrication Advice

The saw uses bar oil to lube the chain and bar rails. Bar oil is designed to stick and cling to the chain and not sling off. Motor oil is not a good substitute for bar oil. Motor oil will not properly lube the chain because it is designed to separate from engine parts and drain back into the oil pan to be reused. Never attempt to use motor oil that has been used as used motor oil has dirt and other particles in it giving it a black color. Used motor oil could contain small metal pieces or shavings which would cause extreme wear on the chain and Stihl 056 bar and may damage your oil pump causing more costly repairs.

The chain needs to be sharp to cut wood fast. Forcing the chain to cut can cause premature wear on the bar rails and stretch the chain. 

Our bars range in size from 10�?? to 42�?? with bar gauges from .043�?? through .063�??. If you are not sure which gauge or pitch you are running on your saw, be sure to check the chain cross over chart to determine your chain's gauge. Additionally, there may be numbers stamped into the bar that may help determine the gauge and pitch chain you will need.

Remember, the best saw to cut wood should have a good sharp chain and good bar to guide the chain.  

Stihl 056 Chainsaw Bar Replacement

Stihl 056 Replacement Bar Maintenance Tips

The bar may need periodic maintenance. If the rails are sharp or rolled over, they will need to be dressed up by removing the rolled edge with a file, a bar rail dresser, or a hand grinder to remove the rolled edge and true the bar rail to be square and true again.

The Stihl 056 bar groove can become worn after use which causes the chain to roll from side to side. If this occurs, the bar should be replaced.

Important NoticeWe are not affiliated with any chainsaw manufacturers and we do not attempt to make any affiliations with them. Any manufacturer logos, model names and numbers are the sole property of their respective owners and are used here for the sole purpose of reference. We do not sell OEM chainsaw parts for any brand. We do however, offer high quality suitable replacement parts guaranteed to meet or beat OEM part specifications like our suitable replacement Chainsaw Stihl 056 Bar we offer for sale for you to buy and put into their brand of chainsaws.