STANDARD CHROME MAHLE PISTON RINGS FITS KOHLER M14 K321 PART # 47-108-05-S

Home > Parts & Tools > 4-Stroke Engines > Kohler > K Series > K321 >

Our Price: $34.95

Product Code: 47-108-05-S

Qty:

Description

NEW STANDARD CHROME MAHLE PISTON RINGS FITS KOHLER M14 K321 PART # 47-105-05-S

SHIPS FROM USA WITH A TRACKING NUMBER

NOT MADE IN CHINA

TORQUE ON CONNECTING ROD 260 INCH POUNDS

CYLINDER HEAD BOLTS 25-30 FOOT POUNDS

OIL PAN AND CLOSURE PLATE 35 FOOT POUNDS

VALVE ADJUSTMENT

INTAKE VALVE .010"

EXHAUST VALVE .019"

POINTS GAP .020"

NOTE: PROPER CONNECTING ROD INSTALLATION IS HOLE IN CONNECTING ROD CAP FACES THE CAMSHAFT.

14HP KOHLER BORE SPECS:

3.500" STANDARD

3.510" .010" OVERSIZE

3.520" .020" OVERSIZE

3.530" .030" OVERSIZE

3.540" .040" OVERSIZE

CONNECTING ROD SPECS:

1.500" STANDARD

1.490" .010" UNDERSIZE

1.480" .020" UNDERSIZE

NOTE: IF CYLINDER IS MORE THEN .003" TAPER IT WILL NEED TO BE REBORED AS INSTALLING NEW PISTON AND RINGS IN A TAPER BORE THEY WILL PROBABLY CAUSE THE ENGINE TO SMOKE & BURN OIL.

KOHLER RECOMMENDS AFTER HONING & OR REBORING THAT THE CYLINDER BE WASHED IN HOT SOAPY WATER TO ENSURE ARE GRIT FROM MACHINING IS REMOVED BEFORE THE NEW PARTS ARE INSTALLED IN THE ENGINE.

Share your knowledge of this product with other customers... Be the first to write a review

	GOVERNOR SPRING FITS KOHLER M18, M20, REPLACES 52-091-04-S, 52 091 04 NEW $17.99
	2 PISTON RINGS FITS KOHLER KT17, KT19, M18, M20, MV16, MV18, MV20, 52-108-09-S,USA $69.95
	TWO NEW CYLINDER HEAD GASKET PART # 24-841-04-S $39.95
	1 NEW STANDARD CONNECTING ROD FITS KOHLER KT17, M18, MV18 ENGINES 52-067-67-S $59.95
	594437 PISTON RINGS & GASKET KIT FITS SOME BRIGGS & STRATTON 16HP, 17HP, 18HP $74.95
	2 NEW .030" .75MM PISTONS OVER SIZE FITS KOHLER CH25 CH26 CH27 CV25 CV27 CH740 $189.95