STANDARD CHROME MAHLE PISTON RINGS FITS KOHLER M14 K321 PART # 47-108-05-S

Home > Parts & Tools > 4-Stroke Engines > Kohler > K Series > K321 >

Our Price: $34.95

Product Code: 47-108-05-S

Qty:

Description

NEW STANDARD CHROME MAHLE PISTON RINGS FITS KOHLER M14 K321 PART # 47-105-05-S

SHIPS FROM USA WITH A TRACKING NUMBER

NOT MADE IN CHINA

TORQUE ON CONNECTING ROD 260 INCH POUNDS

CYLINDER HEAD BOLTS 25-30 FOOT POUNDS

OIL PAN AND CLOSURE PLATE 35 FOOT POUNDS

VALVE ADJUSTMENT

INTAKE VALVE .010"

EXHAUST VALVE .019"

POINTS GAP .020"

NOTE: PROPER CONNECTING ROD INSTALLATION IS HOLE IN CONNECTING ROD CAP FACES THE CAMSHAFT.

14HP KOHLER BORE SPECS:

3.500" STANDARD

3.510" .010" OVERSIZE

3.520" .020" OVERSIZE

3.530" .030" OVERSIZE

3.540" .040" OVERSIZE

CONNECTING ROD SPECS:

1.500" STANDARD

1.490" .010" UNDERSIZE

1.480" .020" UNDERSIZE

NOTE: IF CYLINDER IS MORE THEN .003" TAPER IT WILL NEED TO BE REBORED AS INSTALLING NEW PISTON AND RINGS IN A TAPER BORE THEY WILL PROBABLY CAUSE THE ENGINE TO SMOKE & BURN OIL.

KOHLER RECOMMENDS AFTER HONING & OR REBORING THAT THE CYLINDER BE WASHED IN HOT SOAPY WATER TO ENSURE ARE GRIT FROM MACHINING IS REMOVED BEFORE THE NEW PARTS ARE INSTALLED IN THE ENGINE.

Share your knowledge of this product with other customers... Be the first to write a review

	JONSERED 2083 PISTON KIT, 54MM, REPLACES PART # 503723502 , HIGH QUALITY $29.95
	1 NEW PISTON KIT FITS KOHLER KT17, M18, MV16, MV18, 52-874-11-S, SHIPS FROM USA $89.95
	2 STANDARD CONNECTING RODS KOHLER CV18, CV20 CV22 CV25 CV620 CV740 CV750 CV23, CH18, CH20, CH22, CH23, CH25, CH730, CH740, ECH749, ECV749 $149.95
	2 PISTON RINGS FITS KOHLER KT17, KT19, M18, M20, MV16, MV18, MV20, 52-108-09-S,USA $69.95
	1 NEW CYLINDER HEAD GASKET FITS KOHLER K241, K301, K321, M10, M12, M14 47-041-15 $9.95
	.25MM UNDERSIZED CRANKSHAFT ROD BEARINGS 825740 FITS BRIGGS DAIHATSU DIESEL $99.95
	JONSERED 590, 490 TOP END GASKET KIT $6.99
	POULAN S25DA PISTON KIT, REPLACES PART # 530069298 $29.95
	STIHL REPLACEMENT TUNE UP KIT $19.95