|
|
|
|
|
|
|
|
|
|
|
|
|
2 VALVE COVER ORING FIT KOHLERREPLACES KOHLER PART # 24-153-30-S
NOTE: THESE VALVE COVER ORING GASKET ARE NOT MADE IN TAIWAN OR CHINA
|
KOHLER CRANKCASE BREATHER GASKET FITS KOHLER COMANDE V TWIN ENGINES
NOTE: THIS HIGH QUALITY MADE GASKET IS NOT MADE IN TAIWAN OR CHINAREPLACES THE KOHLER PART NUMBERS: 24-041-51-S 24-041-64-S 24-041-67-S
|
2 BRAND NEW KOHLER VALVE SEALS PART # 25-032-14-S NOTE: THESE HIGH QUALITY MADE VALVE SEALS ARE NOT MADE IN TAIWAN OR CHINA SHIPS FROM USA WITH A TRACKING NUMBER AND FREE SHIPPING TO THE 50 STATES
REPLACES KOHLER PART NUMBER: 25-032-14-S, 2503214, 25 032 14 S, 25 032 14 THESE VALVE SEALS ARE OIL AND HEAT RESISTANT AND RESIST SWELLING
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 KOHLER CRANKSHAFT SEALS, FLYWHEEL SIDE & PTO SIDE NOTE: THESE HIGH QUALITY MADE CRANKSHAFT SEALS ARE NOT MADE IN TAIWAN OR CHINA
REPLACES THESE KOHLER PART NUMBERS: 1- 24 032 01, 24 032 19 FRONT FLYWHEEL CRANKSHAFT SEAL 1- 52 032 08, 25 032 06 REAR PTO CRANKSHAFT SEALS
|
HIGH QUALITY MADE HEAD GASKET KIT FITS 83MM KOHLER ENGINES REPLACES 24-841-04-S, 24-841-03-S, 25-150-03-S, 25-150-24-S, THIS HEAD GASKET KIT IS NOT MADE IN TAIWAN OR CHINA
|
4 KOHLER PUSH RODS PART # 24-411-05-S, REPLACES ORIGINAL KOHLER OEM PUSH RODS
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 BRAND NEW KOHLER VALVE SEALS PART # 25-032-14-S NOTE: THESE HIGH QUALITY MADE VALVE SEALS ARE NOT MADE IN TAIWAN OR CHINA SHIPS FROM USA WITH A TRACKING NUMBER AND FREE SHIPPING TO THE 50 STATES
REPLACES KOHLER PART NUMBER: 25-032-14-S, 2503214, 25 032 14 S, 25 032 14 THESE VALVE SEALS ARE OIL AND HEAT RESISTANT AND RESIST SWELLING
|
4 BRAND NEW OEM KOHLER CYLINDER HEAD STUDS PART # 24-072-09-S
|
1 NEW VOLTAGE REGULATOR 25-755-03-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 M20 KT17 KT19 MV20 MV18 MV16 CH18 CH20 CH22 CH23 CH25 CH26 CV18 CV20 CV22 CV23 CV25 CV27
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 OEM EXHAUST STUDS, NUTS & GASKET, PART # 24-072-24-S, ORIGINAL KOHLER OEM EXHAUST STUDS, REPLACEMENT EXHAUST GASKET PART # 24-041-49-S, 2 REPLACEMENT NUTS 25-100-52-S
|
2 HIGH QUALITY MADE HEAD GASKET KITS FITS 83MM KOHLER ENGINES REPLACES 24-841-04-S, 24-841-03-S, 25-150-03-S, 25-150-24-S, THESE HEAD GASKET KITS ARE NOT MADE IN TAIWAN OR CHINA
|
OEMKOHLER VALVE TRAIN KIT 24-755-66-S
|
|
|
|
|
|
|
|
1 STANDARD CONNECTING ROD KOHLER CV18, CV20 CV22 CV25 CV620 CV740 CV750 CV23, CH18, CH20, CH22, CH23, CH25, CH730, CH740, ECH749, ECV749
|
|
|
|
|
|
|
|
1 OEM CONNECTING RODS FITS KOHLER PART NUMBER # 25-067-04-S
|
1 NEW STATOR 237878-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 M20 KT17 KT19 MV20 MV18 MV16 CH18 CH20 CH22 CH23 CH25 CH26 CV18 CV20 CV22 CV23 CV25 CV27
|
INTAKE & EXHAUST VALVES WITH VALVE SEALS THESE HIGH QUALITY MADE VALVES THAT ARE NOT MADE IN TAIWAN OR CHINA
REPLACES THESE KOHLER PART NUMBERS 2- 24-017-01-S INTAKE VALVE 2- 24-016-01-S OR 32-016-01-S EXHAUST VALVE 2- 24-032-05-S OR 66-032-05-S VALVE SEAL
|
|
|
|
|
|
|
|
|
|
2 STANDARD CONNECTING RODS KOHLER CV18, CV20 CV22 CV25 CV620 CV740 CV750 CV23, CH18, CH20, CH22, CH23, CH25, CH730, CH740, ECH749, ECV749
|
|
|
|
|
|
|
4 OEM KOHLER HYDRAULIC LIFTERS 25-351-11-S WITH KOHLER LIFTER LUBE
|
2 OEM CONNECTING RODS FITS KOHLER PART NUMBER # 25-067-04-S
|
TWO 24-067-05-S OEM KOHLER .010" UNDERSIZED CONNECTING ROD
|
|
|
|
|
|
|
|
2 STANDARD CONNECTING ROD KOHLER CV18, CV20 CV22 CV25 CV620 CV740 CV750 CV23, CH18, CH20, CH22, CH23, CH25, CH730, CH740, ECH749, ECV749
|
|
|
|
|
|
2 OEM CONNECTING RODS FITS KOHLER PART NUMBER # 25-067-04-S
|
2 BRAND NEW .020" .50MM OVERSIZE PISTONS WITH RINGS THAT FIT KOHLER CH25 CH26 CH27 CV25 CV27 CH730, CH740,CH745, CH750, CV724, CV725, CV730, CV740, CV745, CV750, LH755, LF775, SV710, SV715, SV720, SV725, SV730, SV735, SV740, SV810, SV820, SV830, SV840 NOTE: THESE HIGH QUALITY MADE PISTONS ARE NOT MADE IN TAIWAN OR CHINA SHIPS FROM USA WITH A TRACKING NUMBER FEDEX 2 DAY TO THE 50 STATES BE SURE TO VERIFY YOUR KOHLER ENGINE THAT IT HAS A 83MM BORE BEFORE ORDERING |
|
|
