|
|
|
|
|
|
|
|
|
|
|
|
|
2 VALVE COVER ORING FIT KOHLERREPLACES KOHLER PART # 24-153-30-S
NOTE: THESE VALVE COVER ORING GASKET ARE NOT MADE IN TAIWAN OR CHINA
|
KOHLER CRANKCASE BREATHER GASKET FITS KOHLER COMANDE V TWIN ENGINES
NOTE: THIS HIGH QUALITY MADE GASKET IS NOT MADE IN TAIWAN OR CHINAREPLACES THE KOHLER PART NUMBERS: 24-041-51-S 24-041-64-S 24-041-67-S
|
2 BRAND NEW KOHLER VALVE SEALS PART # 25-032-14-S NOTE: THESE HIGH QUALITY MADE VALVE SEALS ARE NOT MADE IN TAIWAN OR CHINA SHIPS FROM USA WITH A TRACKING NUMBER AND FREE SHIPPING TO THE 50 STATES
REPLACES KOHLER PART NUMBER: 25-032-14-S, 2503214, 25 032 14 S, 25 032 14 THESE VALVE SEALS ARE OIL AND HEAT RESISTANT AND RESIST SWELLING
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 KOHLER CRANKSHAFT SEALS, FLYWHEEL SIDE & PTO SIDE NOTE: THESE HIGH QUALITY MADE CRANKSHAFT SEALS ARE NOT MADE IN TAIWAN OR CHINA
REPLACES THESE KOHLER PART NUMBERS: 1- 24 032 01, 24 032 19 FRONT FLYWHEEL CRANKSHAFT SEAL 1- 52 032 08, 25 032 06 REAR PTO CRANKSHAFT SEALS
|
4 KOHLER PUSH RODS PART # 24-411-05-S, REPLACES ORIGINAL KOHLER OEM PUSH RODS
|
4 BRAND NEW KOHLER VALVE SEALS PART # 25-032-14-S NOTE: THESE HIGH QUALITY MADE VALVE SEALS ARE NOT MADE IN TAIWAN OR CHINA SHIPS FROM USA WITH A TRACKING NUMBER AND FREE SHIPPING TO THE 50 STATES
REPLACES KOHLER PART NUMBER: 25-032-14-S, 2503214, 25 032 14 S, 25 032 14 THESE VALVE SEALS ARE OIL AND HEAT RESISTANT AND RESIST SWELLING
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 BRAND NEW OEM KOHLER CYLINDER HEAD STUDS PART # 24-072-09-S
|
1 NEW VOLTAGE REGULATOR 25-755-03-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 M20 KT17 KT19 MV20 MV18 MV16 CH18 CH20 CH22 CH23 CH25 CH26 CV18 CV20 CV22 CV23 CV25 CV27
|
2 OEM EXHAUST STUDS, NUTS & GASKET, PART # 24-072-24-S, ORIGINAL KOHLER OEM EXHAUST STUDS, REPLACEMENT EXHAUST GASKET PART # 24-041-49-S, 2 REPLACEMENT NUTS 25-100-52-S
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 BRAND CYLINDER HEAD GASKET THAT FIT KOHLER CV23, CH23, CV22, CH22 24-841-02-S, 24 841 02, 24-841-02NOTE: THIS HIGH QUALITY MADE CYLINDER GASKETIS NOT MADE IN TAIWAN OR CHINA SHIPS FROM USA WITH A TRACKING NUMBER FEDEX 2 DAY TO THE 50 STATES
|
OEMKOHLER VALVE TRAIN KIT 24-755-66-S
|
IGNITION COILS FIT KOHLER COMMAND V TWIN ENGINES 18-22HP THAT USE THIS PART NUMBER
|
|
|
|
|
|
|
|
|
|
1 STANDARD CONNECTING ROD KOHLER CV18, CV20 CV22 CV25 CV620 CV740 CV750 CV23, CH18, CH20, CH22, CH23, CH25, CH730, CH740, ECH749, ECV749
|
|
|
|
|
|
TWO SETS OF HIGH QUALITY PISTON RINGS REPLACES KOHLER 24-108-18-S, 24-108-29, 2410818, ORIGINAL BORE 80MM STANDARD, 1.5MM RINGS, STYLE AUSED IN THESE KOHLER ENGINES: CH23, CV23PLEASE MEASURE YOUR PISTON RINGS THICKNESS BEFORE ORDERING, IF YOUR RINGS MEASURE 1.2MM THESE PISTON RINGS WILL NOT WORK, THEY ARE LISTED IN MY EBAY STORE. THESE ARE HIGH QUALITY RINGS THAT ARE NOT MADE IN CHINA OR TAIWAN SHIPS FROM USA TWO SETS OF PISTON RINGS REPLACES KOHLER 24-108-18, 24-108-29THESE ARE HIGH QUALITY RINGS THAT ARE NOT MADE IN CHINA OR TAIWAN SHIPS FROM USA KOHLER STANDARD RING SETS, 24 108 18-S, 24-108-29-S STANDARD BORE, FITS 80 MM BORE ENGINE, Style A, SEE PICTURE FOR IDENTIFYING CORRECT PISTON STYLE THAT YOU HAVE 1.5 MM TOP RING THICKNESS, ORIGINAL STANDARD BORE IS 80mm, NOTE: KOHLER HAS USED 2 DIFFERENT RING THICKNESS ON THESE ENGINES LISTED ABOVE, PLEASE MEASURE THE TOP RING THICKNESS TO ENSURE CORRECT RINGS BEFORE ORDERING. I HAVE IN MY EBAY STORE THE 1.2MM THICK RINGS 83MM BORE. NOTE: PLEASE LOOK AT YOUR PISTON TO MAKE SURE YOU HAVE STYLE [A] PISTON WHICH REQUIRES 1.5MM THICK TOP RING
|
1 OEM CONNECTING RODS FITS KOHLER PART NUMBER # 25-067-04-S
|
1 NEW STATOR 237878-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 M20 KT17 KT19 MV20 MV18 MV16 CH18 CH20 CH22 CH23 CH25 CH26 CV18 CV20 CV22 CV23 CV25 CV27
|
|
|
|
|
|
|
|
|
|
|
2 STANDARD CONNECTING RODS KOHLER CV18, CV20 CV22 CV25 CV620 CV740 CV750 CV23, CH18, CH20, CH22, CH23, CH25, CH730, CH740, ECH749, ECV749
|
|
|
|
|
|
INTAKE & EXHAUST VALVES WITH VALVE SEALS THESE HIGH QUALITY MADE VALVES THAT ARE NOT MADE IN TAIWAN OR CHINA
REPLACES THESE KOHLER PART NUMBERS 2- 24-017-01-S INTAKE VALVE 2- 24-016-01-S OR 32-016-01-S EXHAUST VALVE 2- 24-032-05-S OR 66-032-05-S VALVE SEAL
|
4 OEM KOHLER HYDRAULIC LIFTERS 25-351-11-S WITH KOHLER LIFTER LUBE
|
2 OEM CONNECTING RODS FITS KOHLER PART NUMBER # 25-067-04-S
|
|
|
|
|
|
|
|
|
|
2 STANDARD CONNECTING ROD KOHLER CV18, CV20 CV22 CV25 CV620 CV740 CV750 CV23, CH18, CH20, CH22, CH23, CH25, CH730, CH740, ECH749, ECV749
|
|
|
|
|
|
|
TWO 24-067-05-S OEM KOHLER .010" UNDERSIZED CONNECTING ROD
|
2 OEM CONNECTING RODS FITS KOHLER PART NUMBER # 25-067-04-S
|
STANDARD PISTONS KIT FITS KOHLER CH680, CH670 CV23 CV680 CV670 PART # 24 874 54
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 BRAND NEW .020" .50MM OVERSIZE PISTONS WITH RINGS THAT FIT KOHLER CV23, CH23, CV730, CH730 80.50MM, 25-874-57-S-.50MM NOTE: THESE HIGH QUALITY MADE PISTONS ARE NOT MADE IN TAIWAN OR CHINA SHIPS FROM USA WITH A TRACKING NUMBER FEDEX 2 DAY TO THE 50 STATES BE SURE TO VERIFY YOUR KOHLER ENGINE THAT IT HAS A 80MM BORE BEFORE ORDERING
|
OVERHAIL KITS INCLUDES 2 NEW PISTONS WITH RINGS, GASKET SET, CRANKCASE SEALER, CRANKSHAFT SEALS USED IN THESE KOHLER ENGINES: CH23, CV23, 80MM BORE
2- PISTONS 25-874-54-S PISTONS STANDARD BORE 80MM GASKETS & SEALER WITH 2 CRANKSHAFT SEALS
THESE ARE HIGH QUALITY PISTONS & RINGS, GASKETS, SEALS & SEALER THAT ARE NOT MADE IN CHINA OR TAIWAN
|
OVERHAIL KITS INCLUDES 2 NEW .010" OVERSIZED PISTONS WITH RINGS, GASKET SET, CRANKCASE SEALER, CRANKSHAFT SEALS USED IN THESE KOHLER ENGINES: CH23, CV23, 80MM BORE
2- PISTONS 25-874-54-S-10 .010" OVERSIZED PISTONS STANDARD BORE 80MM GASKETS & SEALER WITH 2 CRANKSHAFT SEALS
THESE ARE HIGH QUALITY PISTONS & RINGS, GASKETS, SEALS & SEALER THAT ARE NOT MADE IN CHINA OR TAIWAN
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OVERHAIL KITS INCLUDES 2 NEW .020" OVERSIZED PISTONS WITH RINGS, GASKET SET, CRANKCASE SEALER, CRANKSHAFT SEALS USED IN THESE KOHLER ENGINES: CH23, CV23, 80MM BORE
2- PISTONS 25-874-54-S-20 .020" OVERSIZED PISTONS STANDARD BORE 80MM GASKETS & SEALER WITH 2 CRANKSHAFT SEALS
THESE ARE HIGH QUALITY PISTONS & RINGS, GASKETS, SEALS & SEALER THAT ARE NOT MADE IN CHINA OR TAIWAN
|
OVERHAIL KITS INCLUDES 2 NEW PISTONS WITH RINGS, 2 INTAKE VALVES, 2 EXHAUST VALVES, 2 CONNECTING RODS GASKET SET, CRANKCASE SEALER, CRANKSHAFT SEALS USED IN THESE KOHLER ENGINES: CH23, CV23, CH730, 80MM BORE2- PISTONS 25-874-54-S PISTONS STANDARD BORE 80MM GASKETS & SEALER WITH 2 CRANKSHAFT SEALS
THESE ARE HIGH QUALITY PISTONS & RINGS, GASKETS, SEALS & SEALER THAT ARE NOT MADE IN CHINA OR TAIWAN PLEASE VERIFY BORE SIZE BEFORE ORDERING, THIS IS A 80MM BORE ENGINE |
|
|
|
