You are here: Home > Parts & Tools > 4-Stroke Engines > Kohler > K Series > K482
Sort By:
Page of 1
1 POINTS COVER GROMMET FITS KOHLER K91 K161 K181 K241 K301 K321 K341 K361 K432 K532 K582 NEW CARBURETOR MOUNTING GASKET SET FITS KOHLER K582 K532 K482 M18 M20 KT17 KT19 2 POINTS COVER GROMMET FITS KOHLER K91 K161 K181 K241 K301 K321 K341 K361 K432 K532 K582
IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA

IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
KOHLER OEM 235603-S THROTTLE / CHOKE CABLE SPEED CLIP CARBURETOR GASKET / SPACER FITS KOHLER CAST IRON K241, K341 ENGINES 47-049-01-S GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361
IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
 		A BRAND NEW GASKET & SPACER FIR KOHLER K SERIES 10-16HP, K281, K301, K321, K341,M10, M12, M14,M16, M18, M20, KT17, KT19 REPLACES KOHLER PART # 47-049-01-S, THIS ITEM IS NOT MADE IN CHINA

GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
PLEASE NOTE, NOT ALL OF THE KPHLER MODELS LISTED USED THIS GOVENOR SPRING, PLEASE CONFIRM PART 3 AND COMPARE THE PICTURE WITH YOUR OLD GOVENOR SPRING

1 NEW FUEL PUMP DIAPHRAGM FITS KOHLER K181 K241 K301 K321 K341 M10 M12 M14 M16 25 757 02-S CARBURETOR KIT FITS KOHLER K241 K301 K321 K341 K361 KT17 KT19 K532 POINTS & CONDENSER KIT FIT KOHLER K181 K241 K301 K321 K341. 47 150 03, 230722
THIS FUEL PUMP DIAPHRAGM IS FOR ALL METAL FUEL PUMPS THAT ARE USED ON KOHLER K91, K141, K161, K171, K181, K241, K301, K321, K341, K361, KT17, K19, K482, K532, K582, M8, M10, M12, M14, M16, M18, M20, MV16, MV18, MMV20
THE FUEL PUMP MOUNTING HOLES ARE 1 1/4" FROM CENTER TO CENTER. DIAPHRAGM IS 3 LAYERS, HAS FUEL PUMP RETURN SPRING & NEW FUEL PUMP GASKET
25 757 02-S CARBURETOR KIT FITS KOHLER K241 K301 K321 K341 K361 KT17 KT19 K532 K582 K482 THAT HAVE A BRASS FLOAT
MADE IN SOUTH AMERICA
SHIPS FROM USA WITH A TRACKING NUMBER

SHIPS FROM USA WITH A TRACKING NUMBER
POINTS & CONDENSER KIT FIT KOHLER K181 K241 K301 K321 K341 K361, K482, K532, K582, REPLACES KOHLER PART NUMBERS 47-150-03, 230722
NOTE: THIS HIGH QUALITY REPLACEMENT KOHLER POINTS AND CONDENSER SET FITS BATTERY IGNITION ONLY KOHLER ENGINES. NEVER JUST REPLACE POINTS WITH OUT REPLACING THE CONDENSER, A BAD CONDENSER CAN CAUSE THE POINTS TO FAIL PREMATURLY
2 VALVE GUIDES 235007-S FITS KOHLER K241 K301 K321 K341 K361 K432 K532 K582 NEW CARBURETOR MOUNTING GASKET SET WITH SCREWS FITS KOHLER K582 K532 K482 M18 M20 KT17 KT19 K241 K301, K321, K341, K361, M10, M12, M14, M16 232535-S POINT COVER & GASKET
2 VALVE GUIDES FITS KOHLER K241, K301, K321, K341, M10, M12, M14, M16, 10HP, 12HP, 14HP, 16HP
THIS HIGH QUALITY MADE VALVE GUIDE ARE NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
THIS VALVE GUIDE WILL FIT EITHER INTAKE OR EXHAUST
REPLACES KOHLER PART NUMBER 235007-S

NOTE: AFTER INSTALATION YOU WILL PROBALLY NEED TO REAM THE VALVE GUIDE FOR THE VALVE TO FIT PROPERLY, REFER TO SERVICE MANUAL FOR INSTRUCTIONS AND PROPER TOOLS

NEW POINTS 47-150-03-S, CONDENSER 230722-S, 232535-S POINT COVER & 52-041-11-S GASKET FITS KOHLER K181 K241 K301 K321 K341 K361 K482 K532 K582 BATTERY IGNITION ONLY
NOTE: THIS IS A EXACT REPLACEMNT POINT COVER, POINTS, CONDENSER & POINT COVER GASKET, THAT IS NOT MADE IN CHINA, NICE HEAVY DUTY COVER WITH A FREE POINT COVER GASKET PART # 52-041-11-S 232535-2
NEW 1" MUFFLER 275679 FITS KOHLER K301 K321 K482 K532 K582 K660 M10 M12 M14 M18 M20 1 CYLINDER HEAD GASKET FITS KOHLER K532, K582, K482 REPLACES PART # 48-041-13-S BRAND NEW CRANKSHAFT BEARING FITS KOHLER K482, K532, K582 PART # 277062-S
NEW 1" MUFFLER 275679 FITS KOHLER K241 K301 K321 K482 K532 K582 K660 M10 M12 M14 M18 M20, KT17, KT19
THIS MUFFLER IS NOT MADE IN CHINA
SHIPS FROM USA WITH A TRACKING NUMBER

SPECS ON MUFFLER:
1" FEMALE NPT THREADS ON MUFFLER
PIPE THREADS ARE ANSI/ASME STANDARD DIMENSIONS. PIPE THREAD IS 1" NPT BUT THE OUTSIDE DIAMETER OF THE PIPE MEASURES 1.315"
  • 1 CYLINDER HEAD GASKET FITS KOHLER K532, K582, K482 REPLACES PART # 48-041-13-S
  • HIGH QUALITY AFTERMARKET CRANKSHAFT BEARINGS FITS KOHLER K482, K532, & K582 ENGINES. REPLACES PART # 277062-S THIS IS THE BEARING THAT GOES ON THE BEARING PLATE SIDE OF THE ENGINE. IF YOU ARE LOOKING FOR MORE KOHLER K SERIES SOLID CAST IRON ENGINES 18, 20, 23 HORSE POWER PARTS
1 NEW VOLTAGE REGULATOR 25-755-03 -S FITS KOHLER K241 K301 K321 K341 K361 M16 232535-S POINT COVER, POINTS & CONDENSER 2 CYLINDER HEAD GASKETS FITS KOHLER K532, K582, K482 REPLACES PART # 48-041-13-S
1 NEW VOLTAGE REGULATOR 25-755-03-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 M20 KT17 KT19 MV20 MV18 MV16 CH18 CH20 CH22 CH23 CH25 CH26 CV18 CV20 CV22 CV23 CV25 CV27 NEW POINTS 47-150-03-S, CONDENSER 230722-S, 232535-S POINT COVER & 52-041-11-S GASKET FITS KOHLER K181 K241 K301 K321 K341 K361 K482 K532 K582 BATTERY IGNITION ONLY
NOTE: THIS IS A EXACT REPLACEMNT POINT COVER, POINTS, CONDENSER & POINT COVER GASKET, THAT IS NOT MADE IN CHINA, NICE HEAVY DUTY COVER WITH A FREE POINT COVER GASKET PART # 52-041-11-S 232535-2
  • 2 CYLINDER HEAD GASKET FITS KOHLER K532, K582, K482 REPLACES PART # 48-041-13-S
1 NEW STATOR 237878-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 .040" OVERSIZE OVERHAUL KIT FITS KOHLER K482, 18 HP, PISTONS, VALVES, GASKET SET .030" OVERSIZE OVERHAUL KIT FITS KOHLER K482, 18 HP, PISTONS, VALVES, GASKET SET
1 NEW STATOR 237878-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 M20 KT17 KT19 MV20 MV18 MV16 CH18 CH20 CH22 CH23 CH25 CH26 CV18 CV20 CV22 CV23 CV25 CV27
  • .040" OVERSIZED PISTONS OVERHAUL KIT FITS KOHLER K482 CAST IRON ENGINES, 18 HP, 2 PISTONS WITH RINGS,
    2 INTAKE VALVES, 2 EXHAUST VALVES, GASKET SET WITH SEALS, PLUGS, POINTS & CONDENSER

    OVERHAUL KIT HAS THESE PARTS:
    2 .040" OVERSIZED PISTON WITH RINGS
    2 INTAKE VALVES, 2 EXHAUST VALVES
    47-150-03-S POINTS, 230722 CONDENSER, 2 H10 CHAMPION SPARKPLUGS
    NEW OVERHAUL GASKET & CRANKSHAFT OIL SEAL SET FITS KOHLER K482 ENGINES, REPLACES KOHLER PART NUMBER 48-755-33-S, USA SHIPPING WITH A TRACKING NUMBER.
    NOTE: THIS GASKET SET IS NOT MADE IN CHINA AND THE GASKETS ARE BETTER THEN KOHLER OEM GASKETS, THE HEAD GASKET HAS A FIRE RING FOR BETTER SEALING AND PERFORMANCE. THIS HIGH QUALITY GASKET SET IN NOT MADE IN CHINA, THERE ARE CHEAPER GASKET SETS ON EBAY & AMAZON, BUT YOU GET WHAT YOU PAY FOR. DO THE OVERHAUL ONCE WITH HIGH QUALITY MADE GASKETS AND SEALS.

    K482 18HP KOHLER BORE SPECS:
    3.251" STANDARD
    3.261" .010" OVERSIZE
    3.271" .020" OVERSIZE
    3.281" .030" OVERSIZE
    3.291" .040" OVERSIZE


    THIS HIGH QUALITY MADE GASKET SET HAS THESE GASKETS AND SEALS:
    • 2- HEAD GASKETS
    • 1- BEARING PLATE GASKET
    • 1- OIL PAN GASKET
    • 1- GEAR COVER GASKET
    • GASKET SHIMS AS REQUIRED
    • 1- OIL FILTER ADAPTER GASKET
    • 1- GOVENOR GASKET
    • 2- EXHAUST GASKETS
    • 2 INTAKE GASKETS
    • 2 VALVE COVER GASKETS
    • 1- AIR FILTER ELBOW GASKET
    • 1- POINT COVER GASKET
    • 2- CARBURETOR INTAKE GASKETS
    • 1- PTO CRANKSHAFT SEALS
    • 1- FLYWHEEL CRANKSHAFT SEAL
  • .030" OVERSIZED PISTONS OVERHAUL KIT FITS KOHLER K482 CAST IRON ENGINES, 18 HP, 2 PISTONS WITH RINGS,
    2 INTAKE VALVES, 2 EXHAUST VALVES, GASKET SET WITH SEALS, PLUGS, POINTS & CONDENSER

    OVERHAUL KIT HAS THESE PARTS:
    2 .030" OVERSIZED PISTON WITH RINGS
    2 INTAKE VALVES, 2 EXHAUST VALVES
    47-150-03-S POINTS, 230722 CONDENSER, 2 H10 CHAMPION SPARKPLUGS
    NEW OVERHAUL GASKET & CRANKSHAFT OIL SEAL SET FITS KOHLER K482 ENGINES, REPLACES KOHLER PART NUMBER 48-755-33-S, USA SHIPPING WITH A TRACKING NUMBER.
    NOTE: THIS GASKET SET IS NOT MADE IN CHINA AND THE GASKETS ARE BETTER THEN KOHLER OEM GASKETS, THE HEAD GASKET HAS A FIRE RING FOR BETTER SEALING AND PERFORMANCE. THIS HIGH QUALITY GASKET SET IN NOT MADE IN CHINA, THERE ARE CHEAPER GASKET SETS ON EBAY & AMAZON, BUT YOU GET WHAT YOU PAY FOR. DO THE OVERHAUL ONCE WITH HIGH QUALITY MADE GASKETS AND SEALS.

    K482 18HP KOHLER BORE SPECS:
    3.251" STANDARD
    3.261" .010" OVERSIZE
    3.271" .020" OVERSIZE
    3.281" .030" OVERSIZE
    3.291" .040" OVERSIZE


    THIS HIGH QUALITY MADE GASKET SET HAS THESE GASKETS AND SEALS:
    • 2- HEAD GASKETS
    • 1- BEARING PLATE GASKET
    • 1- OIL PAN GASKET
    • 1- GEAR COVER GASKET
    • GASKET SHIMS AS REQUIRED
    • 1- OIL FILTER ADAPTER GASKET
    • 1- GOVENOR GASKET
    • 2- EXHAUST GASKETS
    • 2 INTAKE GASKETS
    • 2 VALVE COVER GASKETS
    • 1- AIR FILTER ELBOW GASKET
    • 1- POINT COVER GASKET
    • 2- CARBURETOR INTAKE GASKETS
    • 1- PTO CRANKSHAFT SEALS
    • 1- FLYWHEEL CRANKSHAFT SEAL
.020" OVERSIZE OVERHAUL KIT FITS KOHLER K482, 18 HP, PISTONS, VALVES, GASKET SET .010" OVERSIZE OVERHAUL KIT FITS KOHLER K482, 18 HP, PISTONS, VALVES, GASKET SET STANDARD SIZE OVERHAUL KIT FITS KOHLER K482, 18 HP, PISTONS, VALVES, GASKET SET
  • .020" OVERSIZED PISTONS OVERHAUL KIT FITS KOHLER K482 CAST IRON ENGINES, 18 HP, 2 PISTONS WITH RINGS,
    2 INTAKE VALVES, 2 EXHAUST VALVES, GASKET SET WITH SEALS, PLUGS, POINTS & CONDENSER

    OVERHAUL KIT HAS THESE PARTS:
    2 .020" OVERSIZED PISTON WITH RINGS
    2 INTAKE VALVES, 2 EXHAUST VALVES
    47-150-03-S POINTS, 230722 CONDENSER, 2 H10 CHAMPION SPARKPLUGS
    NEW OVERHAUL GASKET & CRANKSHAFT OIL SEAL SET FITS KOHLER K482 ENGINES, REPLACES KOHLER PART NUMBER 48-755-33-S, USA SHIPPING WITH A TRACKING NUMBER.
    NOTE: THIS GASKET SET IS NOT MADE IN CHINA AND THE GASKETS ARE BETTER THEN KOHLER OEM GASKETS, THE HEAD GASKET HAS A FIRE RING FOR BETTER SEALING AND PERFORMANCE. THIS HIGH QUALITY GASKET SET IN NOT MADE IN CHINA, THERE ARE CHEAPER GASKET SETS ON EBAY & AMAZON, BUT YOU GET WHAT YOU PAY FOR. DO THE OVERHAUL ONCE WITH HIGH QUALITY MADE GASKETS AND SEALS.

    K482 18HP KOHLER BORE SPECS:
    3.251" STANDARD
    3.261" .010" OVERSIZE
    3.271" .020" OVERSIZE
    3.281" .030" OVERSIZE
    3.291" .040" OVERSIZE


    THIS HIGH QUALITY MADE GASKET SET HAS THESE GASKETS AND SEALS:
    • 2- HEAD GASKETS
    • 1- BEARING PLATE GASKET
    • 1- OIL PAN GASKET
    • 1- GEAR COVER GASKET
    • GASKET SHIMS AS REQUIRED
    • 1- OIL FILTER ADAPTER GASKET
    • 1- GOVENOR GASKET
    • 2- EXHAUST GASKETS
    • 2 INTAKE GASKETS
    • 2 VALVE COVER GASKETS
    • 1- AIR FILTER ELBOW GASKET
    • 1- POINT COVER GASKET
    • 2- CARBURETOR INTAKE GASKETS
    • 1- PTO CRANKSHAFT SEALS
    • 1- FLYWHEEL CRANKSHAFT SEAL
  • .010" OVERSIZED PISTONS OVERHAUL KIT FITS KOHLER K482 CAST IRON ENGINES, 18 HP, 2 PISTONS WITH RINGS,
    2 INTAKE VALVES, 2 EXHAUST VALVES, GASKET SET WITH SEALS, PLUGS, POINTS & CONDENSER

    OVERHAUL KIT HAS THESE PARTS:
    2 .010" OVERSIZED PISTON WITH RINGS
    2 INTAKE VALVES, 2 EXHAUST VALVES
    47-150-03-S POINTS, 230722 CONDENSER, 2 H10 CHAMPION SPARKPLUGS
    NEW OVERHAUL GASKET & CRANKSHAFT OIL SEAL SET FITS KOHLER K482 ENGINES, REPLACES KOHLER PART NUMBER 48-755-33-S, USA SHIPPING WITH A TRACKING NUMBER.
    NOTE: THIS GASKET SET IS NOT MADE IN CHINA AND THE GASKETS ARE BETTER THEN KOHLER OEM GASKETS, THE HEAD GASKET HAS A FIRE RING FOR BETTER SEALING AND PERFORMANCE. THIS HIGH QUALITY GASKET SET IN NOT MADE IN CHINA, THERE ARE CHEAPER GASKET SETS ON EBAY & AMAZON, BUT YOU GET WHAT YOU PAY FOR. DO THE OVERHAUL ONCE WITH HIGH QUALITY MADE GASKETS AND SEALS.

    K482 18HP KOHLER BORE SPECS:
    3.251" STANDARD
    3.261" .010" OVERSIZE
    3.271" .020" OVERSIZE
    3.281" .030" OVERSIZE
    3.291" .040" OVERSIZE


    THIS HIGH QUALITY MADE GASKET SET HAS THESE GASKETS AND SEALS:
    • 2- HEAD GASKETS
    • 1- BEARING PLATE GASKET
    • 1- OIL PAN GASKET
    • 1- GEAR COVER GASKET
    • GASKET SHIMS AS REQUIRED
    • 1- OIL FILTER ADAPTER GASKET
    • 1- GOVENOR GASKET
    • 2- EXHAUST GASKETS
    • 2 INTAKE GASKETS
    • 2 VALVE COVER GASKETS
    • 1- AIR FILTER ELBOW GASKET
    • 1- POINT COVER GASKET
    • 2- CARBURETOR INTAKE GASKETS
    • 1- PTO CRANKSHAFT SEALS
    • 1- FLYWHEEL CRANKSHAFT SEAL
  • STANDARD SIZE PISTONS OVERHAUL KIT FITS KOHLER K482 CAST IRON ENGINES, 18 HP, 2 PISTONS WITH RINGS,
    2 INTAKE VALVES, 2 EXHAUST VALVES, GASKET SET WITH SEALS, PLUGS, POINTS & CONDENSER

    OVERHAUL KIT HAS THESE PARTS:
    2 STANDARD SIZE PISTON WITH RINGS
    2 INTAKE VALVES, 2 EXHAUST VALVES
    47-150-03-S POINTS, 230722 CONDENSER, 2 H10 CHAMPION SPARKPLUGS
    NEW OVERHAUL GASKET & CRANKSHAFT OIL SEAL SET FITS KOHLER K482 ENGINES, REPLACES KOHLER PART NUMBER 48-755-33-S, USA SHIPPING WITH A TRACKING NUMBER.
    NOTE: THIS GASKET SET IS NOT MADE IN CHINA AND THE GASKETS ARE BETTER THEN KOHLER OEM GASKETS, THE HEAD GASKET HAS A FIRE RING FOR BETTER SEALING AND PERFORMANCE. THIS HIGH QUALITY GASKET SET IN NOT MADE IN CHINA, THERE ARE CHEAPER GASKET SETS ON EBAY & AMAZON, BUT YOU GET WHAT YOU PAY FOR. DO THE OVERHAUL ONCE WITH HIGH QUALITY MADE GASKETS AND SEALS.

    K482 18HP KOHLER BORE SPECS:
    3.251" STANDARD
    3.261" .010" OVERSIZE
    3.271" .020" OVERSIZE
    3.281" .030" OVERSIZE
    3.291" .040" OVERSIZE


    THIS HIGH QUALITY MADE GASKET SET HAS THESE GASKETS AND SEALS:
    • 2- HEAD GASKETS
    • 1- BEARING PLATE GASKET
    • 1- OIL PAN GASKET
    • 1- GEAR COVER GASKET
    • GASKET SHIMS AS REQUIRED
    • 1- OIL FILTER ADAPTER GASKET
    • 1- GOVENOR GASKET
    • 2- EXHAUST GASKETS
    • 2 INTAKE GASKETS
    • 2 VALVE COVER GASKETS
    • 1- AIR FILTER ELBOW GASKET
    • 1- POINT COVER GASKET
    • 2- CARBURETOR INTAKE GASKETS
    • 1- PTO CRANKSHAFT SEALS
    • 1- FLYWHEEL CRANKSHAFT SEAL