You are here: Home > Parts & Tools > 4-Stroke Engines > Kohler > K Series > K582
Sort By:
Page of 2
1 POINTS COVER GROMMET FITS KOHLER K91 K161 K181 K241 K301 K321 K341 K361 K432 K532 K582 NEW CARBURETOR MOUNTING GASKET SET FITS KOHLER K582 K532 K482 M18 M20 KT17 KT19 2 POINTS COVER GROMMET FITS KOHLER K91 K161 K181 K241 K301 K321 K341 K361 K432 K532 K582
IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA

IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
KOHLER OEM 235603-S THROTTLE / CHOKE CABLE SPEED CLIP CARBURETOR GASKET / SPACER FITS KOHLER CAST IRON K241, K341 ENGINES 47-049-01-S 1 NEW FUEL PUMP DIAPHRAGM FITS KOHLER K181 K241 K301 K321 K341 M10 M12 M14 M16
IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
 		A BRAND NEW GASKET & SPACER FIR KOHLER K SERIES 10-16HP, K281, K301, K321, K341,M10, M12, M14,M16, M18, M20, KT17, KT19 REPLACES KOHLER PART # 47-049-01-S, THIS ITEM IS NOT MADE IN CHINA

THIS FUEL PUMP DIAPHRAGM IS FOR ALL METAL FUEL PUMPS THAT ARE USED ON KOHLER K91, K141, K161, K171, K181, K241, K301, K321, K341, K361, KT17, K19, K482, K532, K582, M8, M10, M12, M14, M16, M18, M20, MV16, MV18, MMV20
THE FUEL PUMP MOUNTING HOLES ARE 1 1/4" FROM CENTER TO CENTER. DIAPHRAGM IS 3 LAYERS, HAS FUEL PUMP RETURN SPRING & NEW FUEL PUMP GASKET
25 757 02-S CARBURETOR KIT FITS KOHLER K241 K301 K321 K341 K361 KT17 KT19 K532 POINTS & CONDENSER KIT FIT KOHLER K181 K241 K301 K321 K341. 47 150 03, 230722 2 VALVE GUIDES 235007-S FITS KOHLER K241 K301 K321 K341 K361 K432 K532 K582
25 757 02-S CARBURETOR KIT FITS KOHLER K241 K301 K321 K341 K361 KT17 KT19 K532 K582 K482 THAT HAVE A BRASS FLOAT
MADE IN SOUTH AMERICA
SHIPS FROM USA WITH A TRACKING NUMBER

SHIPS FROM USA WITH A TRACKING NUMBER
POINTS & CONDENSER KIT FIT KOHLER K181 K241 K301 K321 K341 K361, K482, K532, K582, REPLACES KOHLER PART NUMBERS 47-150-03, 230722
NOTE: THIS HIGH QUALITY REPLACEMENT KOHLER POINTS AND CONDENSER SET FITS BATTERY IGNITION ONLY KOHLER ENGINES. NEVER JUST REPLACE POINTS WITH OUT REPLACING THE CONDENSER, A BAD CONDENSER CAN CAUSE THE POINTS TO FAIL PREMATURLY
2 VALVE GUIDES FITS KOHLER K241, K301, K321, K341, M10, M12, M14, M16, 10HP, 12HP, 14HP, 16HP
THIS HIGH QUALITY MADE VALVE GUIDE ARE NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
THIS VALVE GUIDE WILL FIT EITHER INTAKE OR EXHAUST
REPLACES KOHLER PART NUMBER 235007-S

NOTE: AFTER INSTALATION YOU WILL PROBALLY NEED TO REAM THE VALVE GUIDE FOR THE VALVE TO FIT PROPERLY, REFER TO SERVICE MANUAL FOR INSTRUCTIONS AND PROPER TOOLS
NEW CARBURETOR MOUNTING GASKET SET WITH SCREWS FITS KOHLER K582 K532 K482 M18 M20 KT17 KT19 K241 K301, K321, K341, K361, M10, M12, M14, M16 232535-S POINT COVER & GASKET NEW 1" MUFFLER 275679 FITS KOHLER K301 K321 K482 K532 K582 K660 M10 M12 M14 M18 M20


NEW POINTS 47-150-03-S, CONDENSER 230722-S, 232535-S POINT COVER & 52-041-11-S GASKET FITS KOHLER K181 K241 K301 K321 K341 K361 K482 K532 K582 BATTERY IGNITION ONLY
NOTE: THIS IS A EXACT REPLACEMNT POINT COVER, POINTS, CONDENSER & POINT COVER GASKET, THAT IS NOT MADE IN CHINA, NICE HEAVY DUTY COVER WITH A FREE POINT COVER GASKET PART # 52-041-11-S 232535-2
NEW 1" MUFFLER 275679 FITS KOHLER K241 K301 K321 K482 K532 K582 K660 M10 M12 M14 M18 M20, KT17, KT19
THIS MUFFLER IS NOT MADE IN CHINA
SHIPS FROM USA WITH A TRACKING NUMBER

SPECS ON MUFFLER:
1" FEMALE NPT THREADS ON MUFFLER
PIPE THREADS ARE ANSI/ASME STANDARD DIMENSIONS. PIPE THREAD IS 1" NPT BUT THE OUTSIDE DIAMETER OF THE PIPE MEASURES 1.315"
1 CYLINDER HEAD GASKET FITS KOHLER K532, K582, K482 REPLACES PART # 48-041-13-S BRAND NEW CRANKSHAFT BEARING FITS KOHLER K482, K532, K582 PART # 277062-S 1 NEW VOLTAGE REGULATOR 25-755-03 -S FITS KOHLER K241 K301 K321 K341 K361 M16
  • 1 CYLINDER HEAD GASKET FITS KOHLER K532, K582, K482 REPLACES PART # 48-041-13-S
  • HIGH QUALITY AFTERMARKET CRANKSHAFT BEARINGS FITS KOHLER K482, K532, & K582 ENGINES. REPLACES PART # 277062-S THIS IS THE BEARING THAT GOES ON THE BEARING PLATE SIDE OF THE ENGINE. IF YOU ARE LOOKING FOR MORE KOHLER K SERIES SOLID CAST IRON ENGINES 18, 20, 23 HORSE POWER PARTS
1 NEW VOLTAGE REGULATOR 25-755-03-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 M20 KT17 KT19 MV20 MV18 MV16 CH18 CH20 CH22 CH23 CH25 CH26 CV18 CV20 CV22 CV23 CV25 CV27
232535-S POINT COVER, POINTS & CONDENSER 2 CYLINDER HEAD GASKETS FITS KOHLER K532, K582, K482 REPLACES PART # 48-041-13-S 1 BRAND NEW CONNECTING ROD FITS KOHLER K532, K582 .020 UNDERSIZED 48 067 12-20
NEW POINTS 47-150-03-S, CONDENSER 230722-S, 232535-S POINT COVER & 52-041-11-S GASKET FITS KOHLER K181 K241 K301 K321 K341 K361 K482 K532 K582 BATTERY IGNITION ONLY
NOTE: THIS IS A EXACT REPLACEMNT POINT COVER, POINTS, CONDENSER & POINT COVER GASKET, THAT IS NOT MADE IN CHINA, NICE HEAVY DUTY COVER WITH A FREE POINT COVER GASKET PART # 52-041-11-S 232535-2
  • 2 CYLINDER HEAD GASKET FITS KOHLER K532, K582, K482 REPLACES PART # 48-041-13-S
  • 1 BRAND NEW CONNECTING ROD FITS KOHLER K532, K582 ..020" UNDERSIZED CONNECTING ROD, REPLACES KOHLER PART NUMBER 48 067 13, 48-067-13, BIG END 1.606"
    THIS HIGH HIGH QUALITY MADE CONNECTING ROD. KOHLER HAS DISCONTINUED THIS ROD BUT WE HAVE HAD THESE REMADE. IF YOU ARE LOOKING FOR MORE KOHLER K SERIES SOLID CAST IRON ENGINES 23 & 20 HORSE POWER PARTS.
1 BRAND NEW CONNECTING ROD FITS KOHLER K532, K582 .010 UNDERSIZED 48 067 13 1 BRAND NEW CONNECTING ROD FITS KOHLER K532, K582 .STANDARD 48 067 12 1 NEW STATOR 237878-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18
  • 1 BRAND NEW CONNECTING ROD FITS KOHLER K532, K582 ..010" UNDERSIZED CONNECTING ROD, REPLACES KOHLER PART NUMBER 48 067 13, 48-067-13, BIG END 1.616"
    THIS HIGH HIGH QUALITY MADE CONNECTING ROD. KOHLER HAS DISCONTINUED THIS ROD BUT WE HAVE HAD THESE REMADE. IF YOU ARE LOOKING FOR MORE KOHLER K SERIES SOLID CAST IRON ENGINES 23 & 20 HORSE POWER PARTS.
  • 1 BRAND NEW CONNECTING ROD FITS KOHLER K532, K582 .STANDARD CONNECTING ROD, REPLACES KOHLER PART NUMBER 48 067 12, 48-067-12, BIG END 1.626"
    THIS HIGH HIGH QUALITY MADE CONNECTING ROD. KOHLER HAS DISCONTINUED THIS ROD BUT WE HAVE HAD THESE REMADE. IF YOU ARE LOOKING FOR MORE KOHLER K SERIES SOLID CAST IRON ENGINES 23 & 20 HORSE POWER PARTS.
1 NEW STATOR 237878-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 M20 KT17 KT19 MV20 MV18 MV16 CH18 CH20 CH22 CH23 CH25 CH26 CV18 CV20 CV22 CV23 CV25 CV27
2 BRAND NEW CONNECTING RODS FITS KOHLER K532, K582 STANDARD 48 067 12 2 BRAND NEW CONNECTING RODS FITS KOHLER K532, K582 .010 UNDERSIZED 48 067 13 2 BRAND NEW CONNECTING RODS FITS KOHLER K532, K582 .020 UNDERSIZED 48 067 12-20
  • 2 BRAND NEW CONNECTING ROD FITS KOHLER K532, K582 .STANDARD CONNECTING ROD, REPLACES KOHLER PART NUMBER 48 067 12, 48-067-12, BIG END 1.626", WE HAVE .010" & .020" UNDERSIZED CONNECTING RODS IN MY EBAY STORE
    THIS HIGH HIGH QUALITY MADE CONNECTING RODS KOHLER HAS DISCOUNTUINED THESE BUT WE HAVE HAD THESE REMADE. IF YOU ARE LOOKING FOR MORE KOHLER K SERIES SOLID CAST IRON ENGINES 23 & 20 HORSE POWER PARTS.
  • 2 BRAND NEW CONNECTING ROD FITS KOHLER K532, K582 ..010" UNDERSIZED CONNECTING ROD, REPLACES KOHLER PART NUMBER 48 067 13, 48-067-13, BIG END 1.616"
    THIS HIGH HIGH QUALITY MADE CONNECTING RODS KOHLER HAVE BEEN DISCONTINUED. WE HAVE HAD THESE REMADE. IF YOU ARE LOOKING FOR MORE KOHLER K SERIES SOLID CAST IRON ENGINES 23 & 20 HORSE POWER PARTS.
  • 2 BRAND NEW CONNECTING ROD FITS KOHLER K532, K582 ..020" UNDERSIZED CONNECTING ROD, REPLACES KOHLER PART NUMBER 48 067 13, 48-067-13, BIG END 1.606"
    THIS HIGH HIGH QUALITY MADE CONNECTING RODS KOHLER HAVE BEEN DISCOUNTUINED THESE BUT WE HAVE HAD THESE REMADE. IF YOU ARE LOOKING FOR MORE KOHLER K SERIES SOLID CAST IRON ENGINES 23 & 20 HORSE POWER PARTS.
STANDARD OVERHAUL KIT FITS KOHLER K582, 23 HP, PISTONS, VALVES, GASKET SET .010" OVERSIZE PISTONS OVERHAUL KIT FITS KOHLER K582, 23 HP, PISTONS, VALVES, GASKET SET .020" OVERSIZE PISTONS OVERHAUL KIT FITS KOHLER K582, 23 HP, PISTONS, VALVES, GASKET SET
STANDARD SIZE PISTONS OVERHAUL KIT FITS KOHLER K582 CAST IRON ENGINES, 23 HP, 2 PISTONS WITH RINGS,
2 INTAKE VALVES, 2 EXHAUST VALVES, GASKET SET WITH SEALS, PLUGS, POINTS & CONDENSER

OVERHAUL KIT HAS THESE PARTS:
2 STANDARD SIZE PISTON WITH RINGS
2 INTAKE VALVES, 2 EXHAUST VALVES
47-150-03-S POINTS, 230722 CONDENSER, 2 H10 CHAMPION SPARKPLUGS
NEW OVERHAUL GASKET & CRANKSHAFT OIL SEAL SET FITS KOHLER K582 ENGINES, REPLACES KOHLER PART NUMBER 48-755-33-S, USA SHIPPING WITH A TRACKING NUMBER.
NOTE: THIS GASKET SET IS NOT MADE IN CHINA AND THE GASKETS ARE BETTER THEN KOHLER OEM GASKETS, THE HEAD GASKET HAS A FIRE RING FOR BETTER SEALING AND PERFORMANCE. THIS HIGH QUALITY GASKET SET IN NOT MADE IN CHINA, THERE ARE CHEAPER GASKET SETS ON EBAY & AMAZON, BUT YOU GET WHAT YOU PAY FOR. DO THE OVERHAUL ONCE WITH HIGH QUALITY MADE GASKETS AND SEALS.
K582 BORE SIZES:
3.500" STANDARD
3.510" .010" OVERSIZE
3.520" .020" OVERSIZE
3.530" .030" OVERSIZE
3.540" .040" OVERSIZE

THIS HIGH QUALITY MADE GASKET SET HAS THESE GASKETS AND SEALS:
  • 2- HEAD GASKETS
  • 1- BEARING PLATE GASKET
  • 1- OIL PAN GASKET
  • 1- GEAR COVER GASKET
  • GASKET SHIMS AS REQUIRED
  • 1- OIL FILTER ADAPTER GASKET
  • 1- GOVENOR GASKET
  • 2- EXHAUST GASKETS
  • 2 INTAKE GASKETS
  • 2 VALVE COVER GASKETS
  • 1- AIR FILTER ELBOW GASKET
  • 1- POINT COVER GASKET
  • 2- CARBURETOR INTAKE GASKETS
  • 1- PTO CRANKSHAFT SEALS
  • 1- FLYWHEEL CRANKSHAFT SEAL
.010" OVERSIZE PISTONS OVERHAUL KIT FITS KOHLER K582 CAST IRON ENGINES, 23 HP, 2 PISTONS WITH RINGS,
2 INTAKE VALVES, 2 EXHAUST VALVES, GASKET SET WITH SEALS, PLUGS, POINTS & CONDENSER

OVERHAUL KIT HAS THESE PARTS:
2 .010" OVERSIZE PISTON WITH RINGS
2 INTAKE VALVES, 2 EXHAUST VALVES
47-150-03-S POINTS, 230722 CONDENSER, 2 H10 CHAMPION SPARKPLUGS
NEW OVERHAUL GASKET & CRANKSHAFT OIL SEAL SET FITS KOHLER K582 ENGINES, REPLACES KOHLER PART NUMBER 48-755-33-S, USA SHIPPING WITH A TRACKING NUMBER.
NOTE: THIS GASKET SET IS NOT MADE IN CHINA AND THE GASKETS ARE BETTER THEN KOHLER OEM GASKETS, THE HEAD GASKET HAS A FIRE RING FOR BETTER SEALING AND PERFORMANCE. THIS HIGH QUALITY GASKET SET IN NOT MADE IN CHINA, THERE ARE CHEAPER GASKET SETS ON EBAY & AMAZON, BUT YOU GET WHAT YOU PAY FOR. DO THE OVERHAUL ONCE WITH HIGH QUALITY MADE GASKETS AND SEALS.
K582 BORE SIZES:
3.500" STANDARD
3.510" .010" OVERSIZE
3.520" .020" OVERSIZE
3.530" .030" OVERSIZE
3.540" .040" OVERSIZE

THIS HIGH QUALITY MADE GASKET SET HAS THESE GASKETS AND SEALS:
  • 2- HEAD GASKETS
  • 1- BEARING PLATE GASKET
  • 1- OIL PAN GASKET
  • 1- GEAR COVER GASKET
  • GASKET SHIMS AS REQUIRED
  • 1- OIL FILTER ADAPTER GASKET
  • 1- GOVENOR GASKET
  • 2- EXHAUST GASKETS
  • 2 INTAKE GASKETS
  • 2 VALVE COVER GASKETS
  • 1- AIR FILTER ELBOW GASKET
  • 1- POINT COVER GASKET
  • 2- CARBURETOR INTAKE GASKETS
  • 1- PTO CRANKSHAFT SEALS
  • 1- FLYWHEEL CRANKSHAFT SEAL
.020" OVERSIZE PISTONS OVERHAUL KIT FITS KOHLER K582 CAST IRON ENGINES, 23 HP, 2 PISTONS WITH RINGS,
2 INTAKE VALVES, 2 EXHAUST VALVES, GASKET SET WITH SEALS, PLUGS, POINTS & CONDENSER

OVERHAUL KIT HAS THESE PARTS:
2 .020" OVERSIZE PISTON WITH RINGS
2 INTAKE VALVES, 2 EXHAUST VALVES
47-150-03-S POINTS, 230722 CONDENSER, 2 H10 CHAMPION SPARKPLUGS
NEW OVERHAUL GASKET & CRANKSHAFT OIL SEAL SET FITS KOHLER K582 ENGINES, REPLACES KOHLER PART NUMBER 48-755-33-S, USA SHIPPING WITH A TRACKING NUMBER.
NOTE: THIS GASKET SET IS NOT MADE IN CHINA AND THE GASKETS ARE BETTER THEN KOHLER OEM GASKETS, THE HEAD GASKET HAS A FIRE RING FOR BETTER SEALING AND PERFORMANCE. THIS HIGH QUALITY GASKET SET IN NOT MADE IN CHINA, THERE ARE CHEAPER GASKET SETS ON EBAY & AMAZON, BUT YOU GET WHAT YOU PAY FOR. DO THE OVERHAUL ONCE WITH HIGH QUALITY MADE GASKETS AND SEALS.
K582 BORE SIZES:
3.500" STANDARD
3.510" .010" OVERSIZE
3.520" .020" OVERSIZE
3.530" .030" OVERSIZE
3.540" .040" OVERSIZE

THIS HIGH QUALITY MADE GASKET SET HAS THESE GASKETS AND SEALS:
  • 2- HEAD GASKETS
  • 1- BEARING PLATE GASKET
  • 1- OIL PAN GASKET
  • 1- GEAR COVER GASKET
  • GASKET SHIMS AS REQUIRED
  • 1- OIL FILTER ADAPTER GASKET
  • 1- GOVENOR GASKET
  • 2- EXHAUST GASKETS
  • 2 INTAKE GASKETS
  • 2 VALVE COVER GASKETS
  • 1- AIR FILTER ELBOW GASKET
  • 1- POINT COVER GASKET
  • 2- CARBURETOR INTAKE GASKETS
  • 1- PTO CRANKSHAFT SEALS
  • 1- FLYWHEEL CRANKSHAFT SEAL
.030" OVERSIZE PISTONS OVERHAUL KIT FITS KOHLER K582, 23 HP, PISTONS, VALVES, GASKET SET .040" OVERSIZE PISTONS OVERHAUL KIT FITS KOHLER K582, 23 HP, PISTONS, VALVES, GASKET SET MASTER STANDARD OVERHAUL KIT FITS KOHLER K582, 23 HP, PISTONS, VALVES, GASKET SET, RODS
.030" OVERSIZE PISTONS OVERHAUL KIT FITS KOHLER K582 CAST IRON ENGINES, 23 HP, 2 PISTONS WITH RINGS,
2 INTAKE VALVES, 2 EXHAUST VALVES, GASKET SET WITH SEALS, PLUGS, POINTS & CONDENSER

OVERHAUL KIT HAS THESE PARTS:
2 .030" OVERSIZE PISTON WITH RINGS
2 INTAKE VALVES, 2 EXHAUST VALVES
47-150-03-S POINTS, 230722 CONDENSER, 2 H10 CHAMPION SPARKPLUGS
NEW OVERHAUL GASKET & CRANKSHAFT OIL SEAL SET FITS KOHLER K582 ENGINES, REPLACES KOHLER PART NUMBER 48-755-33-S, USA SHIPPING WITH A TRACKING NUMBER.
NOTE: THIS GASKET SET IS NOT MADE IN CHINA AND THE GASKETS ARE BETTER THEN KOHLER OEM GASKETS, THE HEAD GASKET HAS A FIRE RING FOR BETTER SEALING AND PERFORMANCE. THIS HIGH QUALITY GASKET SET IN NOT MADE IN CHINA, THERE ARE CHEAPER GASKET SETS ON EBAY & AMAZON, BUT YOU GET WHAT YOU PAY FOR. DO THE OVERHAUL ONCE WITH HIGH QUALITY MADE GASKETS AND SEALS.
K582 BORE SIZES:
3.500" STANDARD
3.510" .010" OVERSIZE
3.520" .020" OVERSIZE
3.530" .030" OVERSIZE
3.540" .040" OVERSIZE

THIS HIGH QUALITY MADE GASKET SET HAS THESE GASKETS AND SEALS:
  • 2- HEAD GASKETS
  • 1- BEARING PLATE GASKET
  • 1- OIL PAN GASKET
  • 1- GEAR COVER GASKET
  • GASKET SHIMS AS REQUIRED
  • 1- OIL FILTER ADAPTER GASKET
  • 1- GOVENOR GASKET
  • 2- EXHAUST GASKETS
  • 2 INTAKE GASKETS
  • 2 VALVE COVER GASKETS
  • 1- AIR FILTER ELBOW GASKET
  • 1- POINT COVER GASKET
  • 2- CARBURETOR INTAKE GASKETS
  • 1- PTO CRANKSHAFT SEALS
  • 1- FLYWHEEL CRANKSHAFT SEAL
.040" OVERSIZE PISTONS OVERHAUL KIT FITS KOHLER K582 CAST IRON ENGINES, 23 HP, 2 PISTONS WITH RINGS,
2 INTAKE VALVES, 2 EXHAUST VALVES, GASKET SET WITH SEALS, PLUGS, POINTS & CONDENSER

OVERHAUL KIT HAS THESE PARTS:
2 .040" OVERSIZE PISTON WITH RINGS
2 INTAKE VALVES, 2 EXHAUST VALVES
47-150-03-S POINTS, 230722 CONDENSER, 2 H10 CHAMPION SPARKPLUGS
NEW OVERHAUL GASKET & CRANKSHAFT OIL SEAL SET FITS KOHLER K582 ENGINES, REPLACES KOHLER PART NUMBER 48-755-33-S, USA SHIPPING WITH A TRACKING NUMBER.
NOTE: THIS GASKET SET IS NOT MADE IN CHINA AND THE GASKETS ARE BETTER THEN KOHLER OEM GASKETS, THE HEAD GASKET HAS A FIRE RING FOR BETTER SEALING AND PERFORMANCE. THIS HIGH QUALITY GASKET SET IN NOT MADE IN CHINA, THERE ARE CHEAPER GASKET SETS ON EBAY & AMAZON, BUT YOU GET WHAT YOU PAY FOR. DO THE OVERHAUL ONCE WITH HIGH QUALITY MADE GASKETS AND SEALS.
K582 BORE SIZES:
3.500" STANDARD
3.510" .010" OVERSIZE
3.520" .020" OVERSIZE
3.530" .030" OVERSIZE
3.540" .040" OVERSIZE

THIS HIGH QUALITY MADE GASKET SET HAS THESE GASKETS AND SEALS:
  • 2- HEAD GASKETS
  • 1- BEARING PLATE GASKET
  • 1- OIL PAN GASKET
  • 1- GEAR COVER GASKET
  • GASKET SHIMS AS REQUIRED
  • 1- OIL FILTER ADAPTER GASKET
  • 1- GOVENOR GASKET
  • 2- EXHAUST GASKETS
  • 2 INTAKE GASKETS
  • 2 VALVE COVER GASKETS
  • 1- AIR FILTER ELBOW GASKET
  • 1- POINT COVER GASKET
  • 2- CARBURETOR INTAKE GASKETS
  • 1- PTO CRANKSHAFT SEALS
  • 1- FLYWHEEL CRANKSHAFT SEAL
STANDARD SIZE PISTONS OVERHAUL KIT FITS KOHLER K582 CAST IRON ENGINES, 23 HP, 2 PISTONS WITH RINGS,
2 INTAKE VALVES, 2 EXHAUST VALVES, GASKET SET WITH SEALS, CONNECTING RODS, PLUGS, POINTS & CONDENSER

OVERHAUL KIT HAS THESE PARTS:
2 STANDARD SIZE PISTON WITH RINGS
2 INTAKE VALVES, 2 EXHAUST VALVES
47-150-03-S POINTS, 230722 CONDENSER, 2 H10 CHAMPION SPARKPLUGS
2 BRAND NEW STANDARD RODS, IF YOU NEED .010" OR .020" UNDERSIZED CONNECTING RODS. MESSAGE SELLER AT CHECKOUT SO WE CAN SHIP YOU THE UNDERSIZED, NO MESSAGE TO SELLER THEN YOU WILL RECEIVE STANDARD CONNECTING RODS
NEW OVERHAUL GASKET & CRANKSHAFT OIL SEAL SET FITS KOHLER K582 ENGINES, REPLACES KOHLER PART NUMBER 48-755-33-S, USA SHIPPING WITH A TRACKING NUMBER.
NOTE: THIS GASKET SET IS NOT MADE IN CHINA AND THE GASKETS ARE BETTER THEN KOHLER OEM GASKETS, THE HEAD GASKET HAS A FIRE RING FOR BETTER SEALING AND PERFORMANCE. THIS HIGH QUALITY GASKET SET IN NOT MADE IN CHINA, THERE ARE CHEAPER GASKET SETS ON EBAY & AMAZON, BUT YOU GET WHAT YOU PAY FOR. DO THE OVERHAUL ONCE WITH HIGH QUALITY MADE GASKETS AND SEALS.
K582 BORE SIZES:
3.500" STANDARD
3.510" .010" OVERSIZE
3.520" .020" OVERSIZE
3.530" .030" OVERSIZE
3.540" .040" OVERSIZE

THIS HIGH QUALITY MADE GASKET SET HAS THESE GASKETS AND SEALS:
  • 2- HEAD GASKETS
  • 1- BEARING PLATE GASKET
  • 1- OIL PAN GASKET
  • 1- GEAR COVER GASKET
  • GASKET SHIMS AS REQUIRED
  • 1- OIL FILTER ADAPTER GASKET
  • 1- GOVENOR GASKET
  • 2- EXHAUST GASKETS
  • 2 INTAKE GASKETS
  • 2 VALVE COVER GASKETS
  • 1- AIR FILTER ELBOW GASKET
  • 1- POINT COVER GASKET
  • 2- CARBURETOR INTAKE GASKETS
  • 1- PTO CRANKSHAFT SEALS
  • 1- FLYWHEEL CRANKSHAFT SEAL