You are here: Home > Parts & Tools > 4-Stroke Engines > Onan > P216
Sort By:
Page of 2
2 ONAN VALVE CAPS PART # 110-3510 FITS P216, P218, P220, ENGINES NEW USA SHIP NEW 104-0576 SHIM FITS ONAN P216 P218 P220 B43 B48 509-0008 OIL SEAL GOVERNOR SHAFT CCK CCKA CCKB B43 B48 P216 P218 P220 & N SERIES
2 ONAN VALVE CAPS PART # 110-3510 FITS P216, P218, P220, ENGINES NEW
NOTE: THESE VALVE SEALS ARE NOT MADE IN CHINA OR TAIWAN
NEW 104-0575 STEEL THRUST WASHER 104-0576 SHIM FITS ONAN P216 P218 P220 B43 B48, NH NHD NHE, BF, B43G, B48G, P224, T260 & OTHERS
509-0008 OIL SEAL GOVERNOR SHAFT CCK CCKA CCKB CCKM BF B43 B48 P216 P218 P220 P224 T260 NH, NHC N SERIES
NOTE: THIS HIGH QUALITY MADE GOVENOR SEAL IS NOT MADE IN TAIWAN OR CHINA
NEW OIL FILTER ADAPTER GASKET FITS ONAN P216 P218 P220 B43 B48 CCK CCKA CCKB PART # 120-0771 NEW VALVE KEEPERS RETAINERS FITS ONAN P216 P218 P220 # 110-3511, HE110-3511 509-0269 ONAN OIL FILL TUBE /DIP STICK SEAL FITS P216, P218, P220 P224 LX720 LX770 LX790 ENGINES
OIL FILTER ADAPTER GASKET. REPLACES PART #120-0771
CCK CCKA CCKB CCKM BF B43 B48 P216 P218 P220 P224 T260 NH, NHC N SERIES
NEW VALVE KEEPERS RETAINERS FITS ONAN P216 P218 P220 # 110-3511, HE110-3511
NOTE: THIS HIGH QUALITY MADE KEEPERS RETAINERS ARE NOT MADE IN TAIWAN OR CHINA

509-0269 ONAN OIL FILL TUBE /DIP STICK SEAL FITS P216, P218, P220 P224 ENGINES

NOTE: THIS SEAL IS NOT MADE IN CHINA OR TAIWAN

NEW OIL PUMP GASKET KIT FITS ONAN 120-0161 FITS B SERIES P SERIES,NHC CCK ENGINE 122-0502-122-0347 ONAN OIL FILTER GROMMET SEAL FITS CCK CCKA CCKB BF BG43 BG48 P216 P218 1 NEW FUEL PUMP DIAPHRAGM FITS KOHLER K181 K241 K301 K321 K341 M10 M12 M14 M16
NEW OIL PUMP GASKET KIT FITS ONAN 120-0161 FITS B SERIES,P SERIES,NHC,CCK ENGINES
THIS ONAN OIL PUMP KIT IS THE VERY MOST IMPORTANT GASKET IN YOUR ENGINE FITS MOST ALL ONAN 2 CYL. GAS ENGINES B43, B48,P216, P218, P220, P224,CCK,NHC,T260 AND COMES WITH THE OIL PUMP MOUNTING GASKET
NOTE: THIS GASKET KIT IS NOT MADE IN TAIWAN OR CHINA

122-0502, 122-0347 ONAN OIL FILTER GROMMET SEAL FITS P216, P218, P220 P224 ENGINES

NOTE: THIS SEAL IS NOT MADE IN CHINA OR TAIWAN

THIS FUEL PUMP DIAPHRAGM IS FOR ALL METAL FUEL PUMPS THAT ARE USED ON KOHLER K91, K141, K161, K171, K181, K241, K301, K321, K341, K361, KT17, K19, K482, K532, K582, M8, M10, M12, M14, M16, M18, M20, MV16, MV18, MMV20
THE FUEL PUMP MOUNTING HOLES ARE 1 1/4" FROM CENTER TO CENTER. DIAPHRAGM IS 3 LAYERS, HAS FUEL PUMP RETURN SPRING & NEW FUEL PUMP GASKET
BRAND NEW CONDENSER FITS ONAN P216 P218 P220 P224 MODELS, PART # 312-0256 2 ONAN VALVE SEALS 509-0210 FITS P216, P218, P220, ENGINES NEW USA SHIP ONAN 515-0284 FLYWHEEL KEY PERFORMER ENGINES WITH ELECTRONIC IGNITION ONAN & JOHN DEERE P216 P218, P220, LX720 LX770, P224
BRAND NEW CONDENSER FITS ONAN P216 P218 P220 P224 MODELS, PART # 312-0256
ONAN ENGINES USED ON A LOT OF OUTDOOR POWER EQUIPMENT LIKE JOHN DEERE, WHEEL HORSE, MILLER WELDERS, CASE TRACTORS, TORO, STEINER TRACTORS, AND OTHER FINE EQUIPMENT
REPLACES THIS ONAN CONDENSER PART NUMBER:
ONAN PART NUMBER 312-0256
NOTE: THIS CONDENSER IS NOT MADE IN CHINA

TWO ONAN VALVE SEALS 509-0210 FITS P216, P218, P220, ENGINES, NEW

NOTE: THESE VALVE SEALS ARE NOT MADE IN CHINA OR TAIWAN
ONAN 515-0284 FLYWHEEL KEY PERFORMER ENGINES WITH ELECTRONIC IGNITION ONAN & JOHN DEERE P216 P218, P220, LX720 LX770, P224

WILL FIT THE MODELS LISTED BELOW
REPLACES ONAN PART # 515-0284
P216 P218 P220 P224
OL16 OL18 OL20
LX720 LX770 LX790
NEW 104-0575 STEEL THRUST WASHER 104-0576 SHIM FITS ONAN P216 P218 P220 B43 B48 BREATHER TUBE FIT ONAN P216 P218 P220 123-1429 TORO WHEEL HORSE CASE JOHN DEERE BG48 B & P SERIES # HE123-1429 316,318,420 191-2208, 191227, 191-2106, 191-1748, ONAN VOLTAGE REGULATOR FITS P216, P218, P220 P224 OL16 OL18 OL20 LX720 LX770 LX790 ENGINES
NEW 104-0575 STEEL THRUST WASHER 104-0576 SHIM FITS ONAN P216 P218 P220 B43 B48
BREATHER TUBE FITS JOHN DEERE, ONAN BG48 B & P SERIES, TORO, WHEEL HORSE # 123-1429, HE123-1429 316,318,420, CASE INGERSOL RAND C24927
THIS BREATHER TUBE IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER

191-2208, 191227, 191-2106, 191-1748 ONAN VOLTAGE REGULATOR FITS P216, P218, P220 P224 OL16 OL18 OL20 LX720 LX770 LX790 ENGINES

NOTE: THIS VOLTAGE REGULATOR IS NOT MADE IN CHINA

SHIPS FROM USA WITH A TRACKING NUMBER

FITS THESE ONAN ENGINES
P216 P218 P220 P224
OL16 OL18 OL20
LX720 LX770 LX790
NEW ONAN NIKKI CARBURETOR KIT 146-0657 FITS P216 P218 P220 P224 STANDARD CRANKSHAFT MAIN BEARING FIT ONAN P220 P218 P216 B43 B48 CCKA CCKB P224 NH PART # 101-0804 ONAN 120-1320 OIL TRANSFER LINE FITS P216 P218 P220 B48 B43 BF CCK, B & P SERIES
NEW ONAN NIKKI CARBURETOR KIT 146-0657 FITS P216 P218 P220 P224
COMES WITH FUEL FILTER
THESE HIGH QUALITY MADE STANDARD STANDARD MAIN BEARING FITS THESE ONAN ENGINES, B43, B48, BF, P216, P218, P220, P224, NH, NHC, T260, CCK, CCKA, CCKB, REPLACES ONAN 0101-0804 STANDARD CRANKSHAFT BEARING
NOTE: THIS HIGH QUALITY MADE CRANKSHAFT MAIN BEARING IS NOT MADE IN TAIWAN OR CHINA
ONAN 120-1320 OIL TRANSFER LINE FITS P216 P218 P220 B48 B43 BF CCK, B & P SERIES
NOTE: THIS OIL TRANSFER TUBE IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER

120-1320 OIL TRANSFER LINE. THIS OIL LINE RUNS FROM THE INSIDE FROM THE FRONT TO REAR OF THE BLOCK ON MANY ONAN TWIN CYLINDER OPPOSED ENGINES: CCK, CCKA, CCKB, BF, B43, BG43, B48, BG48, P216, P218, P220

NOTE: THIS WILL NOT FIT P224G & T260G ENGINES

120-1320 SUPERCEDES & REPLACES 120-0735
STANDARD NOTCHED CAM BEARINGS & WELCH PLUG FITS ONAN P216 P218 P220 B43 B48 BF TWO PISTON RING SETS REPLACES ONAN 0113-0310 STD RING SET FITS P 216-218-220 NEW 2 PISTON RINGS FITS ONAN 113-0314 STANDARD RING SET FITS B43 B48 EARLY P216 P218 P220

THIS RING SETS IS FOR PISTON DESIGNED TO FIT ONAN ENGINES WITH 3 1/4" STANDARD BORE THAT USE ONAN PART NUMBER 113-0310 .RING SET THIS HAS A .058" TOP RING FOR TYPE OF NEW PISTONS .THAT IS MOST OF YOUR B43 B48 AND LOTS OF YOUR P216, P218, P220 MODELS THAT HAVE HAD NEW PISTON RINGS PLEASE CHECK YOUR PART NUMBER BEFORE ORDERING . THESE ARE DESIGNED FOR EXTRA OIL CONTROL IN USED CYLINDER AND WILL FIT YOUR OEM PISTONS . PLEASE MEASURE YOUR OLD RINGS TO CONFIRM THESE ARE CORRECT, IF THEY ARE THICKER WE HAVE THAT STYLE ALSO IN OUR EBAY STORE OR MESSAGE US AND WE WILL DIRECT YOU TO THE CORRECT LISTING. NUMBERS WON'T HELP NEED MEASUREMENT OF YOUR OLD OIL CONTROL RING

NOTE: THESE PISTON RINGS ARE NOT MADE IN TAIWAN OR CHINA!!!

SHIPS FROM USA WITH A TRACKING NUMBER

THIS RING SET IS FOR LATE STYLE ONAN PISTON:

THE RINGS MEASURE:

TOP: .058" 1/16" OR 1.5MM

SECOND: .058" 1/16" OR 1.5MM

OIL RING: .125" 1/8" OR 3.0MM

THIS RING SET IS DESIGNED FOR TWO PISTONS, PISTON RINGS ARE DESIGNED TO FIT ONAN ENGINES WITH 3 1/4 BORE THAT USE PART NUMBER 113-0314.STD.PISTONS RING SET THIS HAS A .078" TOP RING GROVE FOR TYPE OF NEW PISTONS .THAT IS MOST OF YOUR B43 B48 AND LOTS OF YOUR P MODELS PLEASE CHECK YOUR PART NUMBER BEFORE ORDERING . THESE ARE DESIGNED FOR EXTRA OIL CONTROL IN USED CYLINDER

NOTE: THESE PISTON RINGS ARE NOT MADE IN TAIWAN OR CHINA!!!

THIS RING IS FOR THE EARLY STYLE PISTON

THE RINGS MEASURE:

TOP: .078" 5/64" OR 2.0MM

SECOND: .078" 5/64" OR 2.0MM

OIL RING: .186" 3/16" OR 4.75MM

THREE PIECE STYLE OIL RINGS. FITS THE FOLLOWING ONAN ENGINES WITH A 3 1/4" BORE WITH THE EARLY STYLE PISTON WITH A CASTING NUMBER 112-0163 OR 112-0246. BGE SPECS: E-H, BG, B43E, B43G, B43M, BG48G, B48M & P OR PERFORMER SERIES ENGINES PRIOR TO SPEC D. P216G, R218G, P216V, P218V, P220V.

Bore Size 3 1/4" or 3.250"

PART # 113-0314 SUPERSEDES/REPLACES PART # 113-0189 & 113-0186

COMPLETE GASKET SET WITH CRANKSHAFT SEALS FITS ONAN P220, P218, P216 B48 B43 BF ONAN 150-1257 GOVERNOR BALL SPIDER GEAR B43 B48 P216 P218 P220 CCK CCKA CCKB STANDARD CRANKSHAFT MAIN BEARING FIT ONAN P216 P218 P220 B43 B48 PART # 101-0805
COMPLETE GASKET SET WITH CRANKSHAFT SEALS FITS ONAN P220, P218, P216
NOTE: THE HEAD GASKET ARE METAL CLAD STYLE GASKET NOT THE CHEAP FIBER GASKETS THAT ARE CHINA OR TAIWAN MADE, PREVENTS HEAD GASKET BLOW OUT
NOTE: THIS GASKET KIT IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
150-1257, 0150-1257 GOVERNOR BALL SPIDER GEAR CCK CCKA CCKB CCKM BF B43 B48 P216 P218 P220 P224 T260 NH, NHC N SERIES, PLACES ALL PREVOUIS ONAN GEARS, PLASTIC OF METAL
NOTE: THIS HIGH QUALITY MADE GOVENOR BALL GEAR IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
NOTE: YOU ONLY RECEIVE THE GOVENOR SPIDER GEAR AS PICTURED IN THE MIDDLE OF THE PICTURE WITH LOGO INSIDE. CAMSHAFT GEAR IS FOR REFERENCE ONLY!!!

NOTE: IF YOU NEED PISTONS, GASKETS, SEALS, VALVES, VALVE GUIDES BEARINGS CONNECTING RODS OR OTHER ONAN INTERNAL OR EXTERNAL PARTS PLLEASE CHECK OUT MY EBAY STORE OR MESSAGE ME FOR HELP.
NOTE: INSTALLATION IF YOUR OLD GEAR DOES NOT HAVE THE EXTRUDE FINGER, CUT OFF EXCESS, WILL NOT EFFECT THE PERFORMANCE AT ALL
USE A RUBBER MALLET OR HEAT GUN TO INSTALL GEAR PRESS FIT ON THE CAMSHAFT GEAR
THESE HIGH QUALITY MADE STANDARD STANDARD MAIN BEARING WITH THURST WASHER MADE ONTO THE BEARING FITS THESE ONAN ENGINES, B43, B48, BF P216, P218, P220, P224
NOTE: THIS HIGH QUALITY MADE CRANKSHAFT MAIN BEARING IS NOT MADE IN TAIWAN OR CHINA
0150-1257 GOVERNOR BALL SPIDER GEAR WITH 5 BALLS FITS B43 B48 P216 P218 P220 2 ONAN INTAKE & EXHAUST VALVE GUIDES WITH SEALS P216, P218, P220, NEW, USA SHIP 4 NEW INTAKE & EXHAUST VALVES FIT ONAN & JOHN DEERE P216 P218, P220, LX720 LX770
0150-1257 GOVERNOR BALL SPIDER GEAR WITH 5 NEW 510-0015 GOVERNOR BALLS CCK CCKA CCKB CCKM BF B43 B48 P216 P218 P220 P224 T260 NH, NHC N SERIES, PLACES ALL PREVOUIS ONAN GEARS, PLASTIC OF METAL
NOTE: THIS HIGH QUALITY MADE GOVENOR BALL GEAR IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
NOTE: YOU ONLY RECEIVE THE GOVENOR SPIDER GEAR AS PICTURED IN THE MIDDLE OF THE PICTURE WITH LOGO INSIDE. CAMSHAFT GEAR IS FOR REFERENCE ONLY!!!

NOTE: IF YOU NEED PISTONS, GASKETS, SEALS, VALVES, VALVE GUIDES BEARINGS CONNECTING RODS OR OTHER ONAN INTERNAL OR EXTERNAL PARTS PLLEASE CHECK OUT MY EBAY STORE OR MESSAGE ME FOR HELP.
NOTE: INSTALLATION IF YOUR OLD GEAR DOES NOT HAVE THE EXTRUDE FINGER, CUT OFF EXCESS, WILL NOT EFFECT THE PERFORMANCE AT ALL
USE A RUBBER MALLET OR HEAT GUN TO INSTALL GEAR PRESS FIT ON THE CAMSHAFT GEAR

ONAN P216, P218, P220, LX720, LX770, LX990 INTAKE VALVE GUIDES & 2 EXHAUST VALVE GUIDES & 2 SEALS
NOTE: THESE VALVE GUIDES ARE NOT MADE IN CHINA OR TAIWAN
SHIPS FROM USA WITH A TRACKING NUMBER


REPLACES ONAN PART NUMBERS
INTAKE VALVE GUIDE 110-3526
EXHAUST VAVLE GUIDE 110-3527
INTAKE VALVE SEAL 509-0210
4 BRAND NEW HIGH QUALITY INTAKE & EXHAUST VALVES FOR ONAN ENGINES, WILL FIT THE MODELS LISTED BELOW
REPLACES ONAN PART # 110-3479 AND ONAN PART # 110-3480
P216 P218 P220
OL16 OL18 OL20
LX720 LX770 LX790

The intake valve is larger than the exhaust valve.

Head OD is about 1.375"

Stem OD is about 0.280"

Length is about 4.575"

Use stem seal # 509-0289
GASKET SET PISTON RINGS FITS ONAN STANDARD RING SET B43 B48 EARLY 0113-0314 P216 P218 P220 TWO PISTON & RINGS FITS ONAN ENGINES STD BORE B43 B48 P216 P218 P220 # 0112-0264 TWO 010" OVERSIZED PISTON & RINGS FITS ONAN ENGINES STD BORE B43 B48 P216 P218 P220 # 0112-0264-10

THIS ENGINE REFRESH KIT INCLUDES A COMPLETE GASKET SET WITH CRANKSHAFT SEALS, 2 PISTON RING SET IS , PISTON RINGS ARE DESIGNED TO FIT ONAN ENGINES WITH 3 1/4 BORE THAT USE PART NUMBER 113-0314.STD.PISTONS RING SET THIS HAS A .078" TOP RING GROVE FOR TYPE OF NEW PISTONS .THAT IS MOST OF YOUR B43 B48 AND LOTS OF YOUR P MODELS PLEASE CHECK YOUR PART NUMBER BEFORE ORDERING . THESE ARE DESIGNED FOR EXTRA OIL CONTROL IN USED CYLINDER

NOTE: THESE PISTON RINGS ARE NOT MADE IN TAIWAN OR CHINA!!!

THIS RING IS FOR THE EARLY STYLE PISTON

THE RINGS MEASURE:

TOP: .078" 5/64" OR 2.0MM

SECOND: .078" 5/64" OR 2.0MM

OIL RING: .186" 3/16" OR 4.75MM

THREE PIECE STYLE OIL RINGS. FITS THE FOLLOWING ONAN ENGINES WITH A 3 1/4" BORE WITH THE EARLY STYLE PISTON WITH A CASTING NUMBER 112-0163 OR 112-0246. BGE SPECS: E-H, BG, B43E, B43G, B43M, BG48G, B48M & P OR PERFORMER SERIES ENGINES PRIOR TO SPEC D. P216G, R218G, P216V, P218V, P220V.

Bore Size 3 1/4" or 3.250"

PART # 113-0314 SUPERSEDES/REPLACES PART # 113-0189 & 113-0186

THESE HIGH QUALITY MADE PISTONS ARE FOR STANDARD BORE FOR THESE ONAN ENGINES, B43, B48, P216, P218, P220, BORE 3.250 STANDARD BORE, THESE PISTONS ARE THE SAME WEIGHT AS THE OEM ONAN PISTON
NOTE: THESE HIGH QUALITY MADE PISTON KITS ARE NOT MADE IN TAIWAN OR CHINA
THESE HIGH QUALITY MADE .010" OVERSIZE PISTONS ARE FOR .010" OVERSIZE BORE FOR THESE ONAN ENGINES, B43, B48, P216, P218, P220, BORE 3.250 STANDARD BORE, THESE PISTONS ARE THE SAME WEIGHT AS THE OEM ONAN PISTON
NOTE: THESE HIGH QUALITY MADE PISTON KITS ARE NOT MADE IN TAIWAN OR CHINA