You are here: Home > Parts & Tools > 4-Stroke Engines > Kohler > Magnum Series
Category:
M M10 M12
M14 M16 M18
M20 M8 MV16
MV18 MV20
Sort By:
Page of 4
1 CAMSHAFT SHIM .010" FITS KOHLER K241, K301, K321, K341 K361 M10, M12, M14, M16 PART # 275067-S 1 CAMSHAFT SHIM .005" FITS KOHLER K241, K301, K321, K341 K361, M10, M12, M14, M16 PART # 275066-S 2 SPARKPLUGS FITS KOHLER KT17, KT19, M18, M20, MV16, MV18, MV20, RV17YC CHAMPION
GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA

 		GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA

 		2 SPARKPLUGS FITS KOHLER KT17, KT19, M18, M20, MV16, MV18, MV20, RV17YC CHAMPION
NEW CARBURETOR MOUNTING GASKET SET FITS KOHLER K582 K532 K482 M18 M20 KT17 KT19 1 NEW CYLINDER HEAD GASKET FITS KOHLER K241, K301, K321, M10, M12, M14 47-041-15 KOHLER OEM 235603-S THROTTLE / CHOKE CABLE SPEED CLIP


1 NEW CYLINDER HEAD GASKET FITS KOHLER K241, K301, K321, M10, M12, M14 REPLACES KOHLER PART # 47-041-15, 4704115, 47-041-15-S
NOTE: THESE HIGH QUALITY MADE CYLINDER HEAD GASKET IS NOT MADE IN TAIWAN OR CHINA
IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
ONE NEW IMPROVED HEAD GASKETS FIT KOHLER M18 M20 MV16 MV18 MV20 KT17 KT19 PART # 52-041-20-S CARBURETOR GASKET / SPACER FITS KOHLER CAST IRON K241, K341 ENGINES 47-049-01-S GOVENOR SPRINGS REPLACES KOHLER PART # 47-091-01-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
1 NEW IMPROVED METAL VINTAGE HEAD GASKET FITS KOHLER MV16, MV18, M18, MV20, M20, KT17, KT19 ,PART # 52 041 20-S
METAL HEAD GASKET NOT THE CHEAP 1 TIME USA GRAPHOIL HEAD GASKET THAT FALLS APART WHEN THE HEAD IS TAKEN OFFEPLACES PART # 52-041-20-S
NOTE: THIS GASKET IS NOT MADE IN TAIWAN OR CHINA
A BRAND NEW GASKET & SPACER FIR KOHLER K SERIES 10-16HP, K281, K301, K321, K341,M10, M12, M14,M16, M18, M20, KT17, KT19 REPLACES KOHLER PART # 47-049-01-S, THIS ITEM IS NOT MADE IN CHINA

GOVENOR SPRINGS REPLACES KOHLER PART # 47-091-01-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
PLEASE NOTE, NOT ALL OF THE KPHLER MODELS LISTED USED THIS GOVENOR SPRING, PLEASE CONFIRM PART 3 AND COMPARE THE PICTURE WITH YOUR OLD GOVENOR SPRING
GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361 NEW BREATHER HOSE FITS KOHLER K321, K341 ENGINES REPLACES PART # 47-326-01-S 1 NEW FUEL PUMP DIAPHRAGM FITS KOHLER K181 K241 K301 K321 K341 M10 M12 M14 M16
GOVENOR SPRINGS REPLACES KOHLER PART # 235496-S, K281, K301, K321, K341, K361
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
PLEASE NOTE, NOT ALL OF THE KPHLER MODELS LISTED USED THIS GOVENOR SPRING, PLEASE CONFIRM PART 3 AND COMPARE THE PICTURE WITH YOUR OLD GOVENOR SPRING

BREATHER HOSE 47-326-01-S, FITS KOHLER K241, K301, K321, K341 ENGINES, NEW
SHIPS FROM USA WITH A TRACKING NUMBER
THIS BREATHER TUBE IS NOT MADE IN TAIWAN OR CHINA
SHIPS PROUDLY FROM USA WITH A TRACKING NUMBER
THIS FUEL PUMP DIAPHRAGM IS FOR ALL METAL FUEL PUMPS THAT ARE USED ON KOHLER K91, K141, K161, K171, K181, K241, K301, K321, K341, K361, KT17, K19, K482, K532, K582, M8, M10, M12, M14, M16, M18, M20, MV16, MV18, MMV20
THE FUEL PUMP MOUNTING HOLES ARE 1 1/4" FROM CENTER TO CENTER. DIAPHRAGM IS 3 LAYERS, HAS FUEL PUMP RETURN SPRING & NEW FUEL PUMP GASKET
25 757 02-S CARBURETOR KIT FITS KOHLER K241 K301 K321 K341 K361 KT17 KT19 K532 GOVERNOR SPRING FITS KOHLER M18, M20, REPLACES 52-091-04-S, 52 091 04 NEW NEW CARBURETOR MOUNTING GASKET SET WITH SCREWS FITS KOHLER K582 K532 K482 M18 M20 KT17 KT19 K241 K301, K321, K341, K361, M10, M12, M14, M16
25 757 02-S CARBURETOR KIT FITS KOHLER K241 K301 K321 K341 K361 KT17 KT19 K532 K582 K482 THAT HAVE A BRASS FLOAT
MADE IN SOUTH AMERICA
SHIPS FROM USA WITH A TRACKING NUMBER

SHIPS FROM USA WITH A TRACKING NUMBER
REPLACEMENT KOHLER M18, M20 GOVENOR SPRING REPLACES PART # 52-091-04-S
NOTE: THIS HIGH QUALITY REPLACEMENT GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA



1 NEW CRANKSHAFT BEARING FITS KOHLER K241, K301, K321, K341, M10, M12, M14, M16 MUFFLER 45-068- 01-S, 1-1/4" PIPE FITS KOHLER K341 M16 16HP CAST IRON ENGINES T-NEW IMPROVED HEAD GASKETS FIT KOHLER M18 M20 MV16 MV18 MV20 KT17 KT19 PART # 52-041-20-S
1 NEW CRANKSHAFT BEARINGS ARE A HIGH QUALITY BEARING THAT WILL REPLACE KOHLER PART NUMBER A235376S, FITS KOHLER ENGINE MODELS K241, K301, K321, K341, M10, M12, M14, M16
THESE BEARINGS WILL MATCH YOUR KOHLER BEARING AND ARE THE SAME SPECS AND HIGH QUALITY AS THE OEM KOHLER BEARINGS AT THE FRACTION OF THE PRICE
1 NEW MUFFLER 45-068-01-S, 1-1/4" PIPE FITS KOHLER K341 M16 16HP ENGINES
THIS MUFFLER IS NOT MADE IN CHINA
SHIPS FROM USA WITH A TRACKING NUMBER

SPECS ON MUFFLER
1- 45-086-01-S 1 1/4" NPT THREAD, NPT PIPE THREADS USE ANSI/ASME STANDARD DIMENSIONS. THE 1 1/4" PIPE THREAD MUFFLER THE OUTSIDE DIAMETER OF YOUR PIPE WILL MEASURE 1.660"
THE MUFFLER IS 4 1/4" DIAMETER AND 3" TALL
2 NEW IMPROVED METAL VINTAGE HEAD GASKET FITS KOHLER MV16, MV18, M18, MV20, M20, KT17, KT19 ,PART # 52 041 20-S
METAL HEAD GASKET NOT THE CHEAP 1 TIME USA GRAPHOIL HEAD GASKET THAT FALLS APART WHEN THE HEAD IS TAKEN OFFEPLACES PART # 52-041-20-S
NOTE: THESE GASKETS ARE NOT MADE IN TAIWAN OR CHINA
1 OIL RELIEF VALVE KIT FIT KOHLER KT17 M18 KT19 M20 MV16 MV18 MV20 # 52-755-50-S 1 NEW BALANCE GEAR SPACER KIT 47-755-01-S FITS KOHLER K301 K321 K341 M12 M14 M16 1 NEW VOLTAGE REGULATOR 25-755-03 -S FITS KOHLER K241 K301 K321 K341 K361 M16
1 OIL RELIEF VALVE KIT FIT KOHLER KT17 M18 KT19 M20 MV16 MV18 MV20 # 52-755-50-S
REPLACES PART # 52-755-50-S, NOTE: THIS OIL RELIEF PRESSURE VALVE KIT IS NOT MADE IN CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
1 K241, K301, K321, M10, M12, M14 REPLACES KOHLER PART # 47-755-01, 4775501, 47-155-01-S
NOTE: THESE HIGH QUALITY MADE BALNCE SHIM KIT IS NOT MADE IN TAIWAN OR CHINA
1 NEW VOLTAGE REGULATOR 25-755-03-S FITS KOHLER K241 K301 K321 K341 K361 M10 M12 M14 M16 M18 M20 KT17 KT19 MV20 MV18 MV16 CH18 CH20 CH22 CH23 CH25 CH26 CV18 CV20 CV22 CV23 CV25 CV27
1 NEW GOVENOR GEAR FITS KOHLER K241 K301 K321 K341 M10 M12 M14 M16 # A-235743-S NEW STANDARD CONNECTING ROD FITS KOHLER K 321, M14 12HP PART # 45-067-09-S COMPLETE GASKET SET WITH CRANK SEALS FITS K341, 16HP ENGINES, PART # 45-755-04-S
1 NEW GOVENOR GEAR FITS KOHLER K241 K301 K321 K341 M10 M12 M14 M16, KT17, M18, KT19, M20 MV18, MV16, MV20 # A-235743-S
NOTE: THIS IS A HIGH QUALITY MADE KOHLER GOVENOR GEAR, NOT MADE IN CHINA
NEW CONNECTING ROD FITS KOHLER K 301 12HP, K321 14HP KOHLER PART # 45-067-09-S

THIS IS FOR STANDARD CRANK PIN THAT MEASURES 1.50"
 		COMPLETE GASKET SET WITH CRANK SEALS FITS K341, 16HP ENGINES, PART # 45-755-04-S, 23 PIECE SET
THIS HIGH QUALITY MADE GASKET SET IS NOT MADE IN TAIWAN OR CHINA, COMES WITH A METAL HEAD GASKET
SHIPS FROM USA WITH A TRACKING NUMBER
NEW .010" UNDERSIZED CONNECTING ROD FITS KOHLER K301 12HP, K321 14HP # 4506710S STANDARD CHROME MAHLE PISTON RINGS FITS KOHLER M14 K321 PART # 47-108-05-S COMPLETE GASKET SET WITH CRANK SEALS FITS M10, M12, M14 ENGINES # 47-755-27-S
NEW CONNECTING ROD FITS KOHLER K 301 12HP, K321 14HP KOHLER PART # 45-067-09-S

THIS IS FOR .010" UNDERSIZED CRANK PIN THAT MEASURES 1.40"
 		NEW STANDARD CHROME MAHLE PISTON RINGS FITS KOHLER M14 K321 PART # 47-105-05-S
SHIPS FROM USA WITH A TRACKING NUMBER
NOT MADE IN CHINA

TORQUE ON CONNECTING ROD 260 INCH POUNDS
CYLINDER HEAD BOLTS 25-30 FOOT POUNDS
OIL PAN AND CLOSURE PLATE 35 FOOT POUNDS
VALVE ADJUSTMENT
INTAKE VALVE .010"
EXHAUST VALVE .019"
POINTS GAP .020"
NOTE: PROPER CONNECTING ROD INSTALLATION IS HOLE IN CONNECTING ROD CAP FACES THE CAMSHAFT.

14HP KOHLER BORE SPECS:
3.500" STANDARD
3.510" .010" OVERSIZE
3.520" .020" OVERSIZE
3.530" .030" OVERSIZE
3.540" .040" OVERSIZE

CONNECTING ROD SPECS:
1.500" STANDARD
1.490" .010" UNDERSIZE
1.480" .020" UNDERSIZE

NOTE: IF CYLINDER IS MORE THEN .003" TAPER IT WILL NEED TO BE REBORED AS INSTALLING NEW PISTON AND RINGS IN A TAPER BORE THEY WILL PROBABLY CAUSE THE ENGINE TO SMOKE & BURN OIL.
KOHLER RECOMMENDS AFTER HONING & OR REBORING THAT THE CYLINDER BE WASHED IN HOT SOAPY WATER TO ENSURE ARE GRIT FROM MACHINING IS REMOVED BEFORE THE NEW PARTS ARE INSTALLED IN THE ENGINE.
COMPLETE GASKET SET WITH CRANK SEALS FITS M10, M12, M14 10HP, 12HP, 14HP ENGINES, PART # 45-755-27-S, 22 PIECE SET
THIS HIGH QUALITY MADE GASKET SET IS NOT MADE IN CHINA, COMES WITH A METAL HEAD GASKET
SHIPS FROM USA WITH A TRACKING NUMBER
NOTE: THE SHIM GASKETS ARE CORRECT FOR A MAGNUM SERIES 10HP 12HP & 14HP KOHLER ENGINES, MOST OTHER GASKET SETS HAVE THE WRONG SHIP GASKETS AND THEY WILL LEAK OIL AS THEY ARE NOT DESIGNED CORECTLY FOR YOU KOHLER MAGNUM ENGINE

D-235327-S VALVE TAPPETS FITS KOHLER K301, K321, K341, K241, M10, M12, M14, M16 D-235327-S VALVE TAPPET FITS KOHLER K301, K321, K341, K241, M10, M12, M14, M16 2 NEW BALANCE GEAR SHAFT FITS KOHLER K241, K301, K321, K341 K361 PART # 236559-S
D-235327-S VALVE TAPPETS {2} FITS KOHLER K301, K321, K341, K241, M10, M12, M14, M16 D-235327-S VALVE TAPPETS {1} FITS KOHLER K301, K321, K341, K241, M10, M12, M14, M16 GOVENOR SPRINGS REPLACES KOHLER PART # 47-091-01-S, K281, K301, K321, K341, K361, M10, M12, M14, M16
NOTE: THIS GOVENOR SPRING IS NOT MADE IN TAIWAN OR CHINA
SHIPS FROM USA WITH A TRACKING NUMBER
PLEASE NOTE, NOT ALL OF THE KPHLER MODELS LISTED USED THIS GOVENOR SPRING, PLEASE CONFIRM PART 3 AND COMPARE THE PICTURE WITH YOUR OLD GOVENOR SPRING