You are here: Home > Parts & Tools > 4-Stroke Engines > Kohler > Magnum Series > M8
Sort By:
Page of 1
KOHLER OEM 235603-S THROTTLE / CHOKE CABLE SPEED CLIP ONE NEW IMPROVED HEAD GASKETS FIT KOHLER M18 M20 MV16 MV18 MV20 KT17 KT19 PART # 52-041-20-S 1 NEW FUEL PUMP DIAPHRAGM FITS KOHLER K181 K241 K301 K321 K341 M10 M12 M14 M16
IGNITION COIL FITS MAGNETO IGNITION KOHLER K141 K161 K181 K241 K301 K321 47-755-20-S
NOTE: THESE HIGH QUALITY MADE MAGNETO COIL IS NOT MADE IN CHINA
 		1 NEW IMPROVED METAL VINTAGE HEAD GASKET FITS KOHLER MV16, MV18, M18, MV20, M20, KT17, KT19 ,PART # 52 041 20-S
METAL HEAD GASKET NOT THE CHEAP 1 TIME USA GRAPHOIL HEAD GASKET THAT FALLS APART WHEN THE HEAD IS TAKEN OFFEPLACES PART # 52-041-20-S
NOTE: THIS GASKET IS NOT MADE IN TAIWAN OR CHINA
THIS FUEL PUMP DIAPHRAGM IS FOR ALL METAL FUEL PUMPS THAT ARE USED ON KOHLER K91, K141, K161, K171, K181, K241, K301, K321, K341, K361, KT17, K19, K482, K532, K582, M8, M10, M12, M14, M16, M18, M20, MV16, MV18, MMV20
THE FUEL PUMP MOUNTING HOLES ARE 1 1/4" FROM CENTER TO CENTER. DIAPHRAGM IS 3 LAYERS, HAS FUEL PUMP RETURN SPRING & NEW FUEL PUMP GASKET
T-NEW IMPROVED HEAD GASKETS FIT KOHLER M18 M20 MV16 MV18 MV20 KT17 KT19 PART # 52-041-20-S 1 NEW GOVENOR GEAR FITS KOHLER K241 K301 K321 K341 M10 M12 M14 M16 # A-235743-S TWO KOHLER VALVE GUIDES FITS KT17, KT19, M18, M20, MV16, MV18, MV20, 52-316-08-S
2 NEW IMPROVED METAL VINTAGE HEAD GASKET FITS KOHLER MV16, MV18, M18, MV20, M20, KT17, KT19 ,PART # 52 041 20-S
METAL HEAD GASKET NOT THE CHEAP 1 TIME USA GRAPHOIL HEAD GASKET THAT FALLS APART WHEN THE HEAD IS TAKEN OFFEPLACES PART # 52-041-20-S
NOTE: THESE GASKETS ARE NOT MADE IN TAIWAN OR CHINA
1 NEW GOVENOR GEAR FITS KOHLER K241 K301 K321 K341 M10 M12 M14 M16, KT17, M18, KT19, M20 MV18, MV16, MV20 # A-235743-S
NOTE: THIS IS A HIGH QUALITY MADE KOHLER GOVENOR GEAR, NOT MADE IN CHINA
TWO KOHLER VALVE GUIDE FITS KT17, KT19, M18, M20, MV16, MV18, MV20, # 52-316-08-S
NOTE: NOT MADE IN CHINA OR TAIWAN
K181, 8M, 8HP STANDARD OVERHAUL REBUILD FIT FITS KOHLER PISTON, VALVES, ROD
8HP STANDARD OVERHAUL REBUILD FIT FITS KOHLER K181, M8 PISTON, INTAKE & EXHAUST VALVES, STANDARD CONNECTING ROD, IF YOU WANT A .010" ,020" OR .030" UNDERSIZED ROD AT CHECK YOU HAVE TO LEAVE SELLER A MESSAGE STATING THAT YOU WANT A UNDERSIZED CONNECTING ROD, NO MESSAGE WE WILL SHIP YOU A STANDARD CONNECTING ROD
HIGH QUAILTY MADE PISTON COMES WITH 3 PIECE OIL RINGS FOR BETTER OIL CONTROL AND LONGER LIFE
WE HAVE OTHER KOHLER K SERIES PARTS IN OUR EBAY STORE, IF YOU DON'T SEE IT PLEASE ASK
NONE OF THESE PARTS ARE MADE IN CHINA, SHIPS FROM USA WITH A TRACKING NUMBER


THIS KIT CONTAINS THESE HIGH QUALITY MADE PARTS:
1- 41-874-05-S PISTON KIT WITH RINGS
1- 41-755-06-S GASKET SET WITH SEALS
1- INTAKE VALVE 230582S
1- EXHAUST VALVE 230710-S
1- STANDARD CONNECTING ROD 41-067-10-S NOTE: IF UNDERSIZED ROD IS NEEDED READ NOTE ABOVE

ENGINE SPECS-INFORMATION
STANDARD CYLINDER BORE 2.9375"
.010" OVERSIZE 2.9475"
.020" OVERSIZE 2.9575"
.030" OVERSIZE 2.9675

STANDARD CONECTING ROD 1.186"
.010" UNDERSIZED CONECTING ROD 1.176"
.020" UNDERSIZED CONECTING ROD 1.166"
.030" UNDERSIZED CONECTING ROD 1.156"
NOTE: OIL HOLE IN CONNECTING ROD FACES CAM SHAFT

TORQUE SPECS

CYLINDER HEAD 15-20 FOOT POUNDS

NEW CONECTING ROD 140 INCH POUNDS USED CONNECTING ROD 100 INCH POUNDS